This 18 AWG, 2-conductor stranded shielded control cable is for installers and electrical contractors wiring indoor power-limited control, security, intercom, background music, and audio systems. Its 1,000-foot spool provides cable for routed control and signal connections.
The gray cable has stranded copper conductors with PVC insulation, an overall PVC jacket, and cabled construction with short twist lengths. A 100% aluminum-polyester foil shield and tinned-copper drain wire are included. It is rated NEC Type CMR and meets 300-volt requirements specified in NEC Articles 800 and 725.
Key Features:
- Two 18 AWG Conductors: Provides a two-conductor cable configuration for compatible control and signal wiring.
- Foil Shield with Drain Wire: Supports shielded cable installation with 100% aluminum-polyester foil coverage and a tinned-copper drain wire.
- PVC Insulation and Jacket: Provides insulated conductors and an overall PVC outer jacket.
- 1,000-Foot Spool: Supplies an extended cable length for installation work.
- CMR Rating: Meets NEC Type CMR requirements for applicable indoor installations.
Choose this gray 18 AWG, 2-conductor cable when a shielded, CMR-rated control cable is needed for compatible indoor low-voltage control, audio, intercom, or security system wiring.
| Certifications: |
ETL & UL |
| Color/Finish: |
Gray |
| Country of Origin: |
US |
| Material: |
Aluminum |
| Product Depth: |
12.75" |
| Product Height: |
9.5" |
| Product Type: |
Electrical Wire & Cable |
| Product Width: |
12.75" |
| Quantity Included: |
1 |
| Shipping Weight: |
19 lbs |
| Manufacturer Part Number: |
1033GY1S |
| Color: |
Gray |
| Gauge/Conductor: |
18 AWG Bare Copper ga |
| Insulation Thickness: |
0.008 in. (0.203 mm.) Nominal |
| Jacket Thickness: |
0.015 in. (0.381 mm.) Nominal |
| Nominal Outside Diameter: |
0.158 in. (4.013 mm.) Nominal in |
| Weight per 1,000 Feet: |
19 lbs |
| Brand: |
CCT |
| Drain: |
Stranded Tinned Copper |
| Insulation Material: |
Polyvinyl Chloride |
| Jacket Type: |
Polyvinyl Chloride |
| Manufacturers Part Number: |
1033GY1S |
| Number of Conductors: |
2 Conductor |
| Shield: |
Aluminum/Polyester Tape (100 Percent Coverage) |
| Stranding: |
7 Strand |
| Width: |
12.75
in
|
| Height: |
9.50
in
|
| Depth: |
12.75
in
|
No additional information available.