Two Stage Air Compressors

Two stage air compressors provide a stationary compressed-air source for commercial and industrial work areas, including shops and facilities with higher air-demand needs. When selecting a unit, consider the pressure and airflow required by pneumatic equipment, available electrical power, receiver-tank storage, pump design, and the space available for the compressor footprint.

Product Display:
Helpful Buying Guide

How to Choose a Two Stage Air Compressor

A two stage air compressor can support commercial and industrial compressed-air tasks where a high-capacity stationary air source is needed. Start with the needs of the pneumatic equipment and work area, then confirm that pressure, airflow, power, tank configuration, and installation space align with the application.

Visual Guide

Popular examples in this category

Use Cases

Support stationary compressed-air work

Two stage air compressors are suited to commercial and industrial work areas that need a dedicated compressed-air source for pneumatic tasks.

How to Choose

Match air demand and installation requirements

Review required pressure and airflow, then consider receiver-tank storage, electrical compatibility, pump design, and the available footprint.

Applications

Designed for shops and facilities

These compressors can serve shop and facility air-demand needs, particularly where pneumatic equipment has higher-pressure requirements.

Additional Information

Consider tank orientation and lubrication

A vertical receiver tank can provide substantial air storage while using a vertical footprint. Oil-lubricated, cast-iron pump construction is another feature to consider.

Two-stagePump configuration

A two-stage, oil-lubricated cast-iron pump is featured on a representative unit.

80 gal.Receiver tank example

A representative vertical model includes an 80-gallon receiver tank.

175 PSIMaximum pressure example

A representative unit is listed with 175 PSI maximum pressure.

29 CFMAirflow example

A representative unit is listed with 29 CFM output.

Comparison Guide

Selection Factors at a Glance

Use these considerations to compare two stage air compressors for the needs of the work area and connected pneumatic equipment.

Selection factorWhat to reviewWhy it matters
PressureMaximum pressure supported by the unitHelps determine compatibility with higher-pressure pneumatic equipment requirements.
AirflowCFM output for the intended tasksHelps align compressor output with commercial or industrial air-demand needs.
Tank and footprintReceiver-tank storage and vertical configurationA vertical tank can provide substantial storage while using a vertical footprint.
Electrical powerAvailable power and unit electrical requirementThe electrical installation must be compatible with the compressor.
Planning Guide

Plan the right fit before choosing

Plan for Air Demand

Begin with pressure and airflow needs

The compressor should align with the requirements of the pneumatic equipment it will support. Higher-pressure equipment needs call for appropriate maximum pressure, while airflow output should suit the intended compressed-air tasks.

  • Identify the pressure required by pneumatic equipment.
  • Consider airflow needs for commercial or industrial tasks.
  • Use receiver-tank storage as part of the air-demand plan.
Confirm Installation Fit

Review power and footprint before selecting

Stationary compressors need compatible electrical installation and adequate placement space. For example, a vertical tank configuration stores air while using a vertical footprint, and a listed unit uses 208–230V single-phase power.

  • Verify compatible electrical power at the installation location.
  • Consider whether a vertical tank layout fits the available space.
  • Allow for a stationary compressor and receiver tank in the work area.
Evaluate Construction Features

Compare the pump and storage configuration

Pump design and tank configuration affect how a compressor fits a work area’s needs. An oil-lubricated two-stage cast-iron pump is described as providing durable compressed-air performance, while a receiver tank supplies stored air for shop and facility demand.

  • Consider an oil-lubricated pump design.
  • Review cast-iron pump construction where it is offered.
  • Choose a receiver-tank configuration that suits the work area.
FAQ

Common questions before buying

What is a two stage air compressor used for?

It provides a stationary compressed-air source for commercial and industrial work areas, shops, and facilities with compressed-air demand.

What should I compare when choosing a two stage air compressor?

Compare required pressure, airflow, receiver-tank storage, pump design, electrical compatibility, and available footprint.

Why consider a vertical receiver tank?

A vertical receiver tank can supply substantial air storage while using a vertical footprint.

What electrical detail should I verify?

Confirm that the installation has power compatible with the compressor. One representative unit uses 208–230V single-phase power.