Chop Saw & Cold Saw Machines

Chop saw and cold saw machines are stationary or benchtop tools for controlled metal cutting in fabrication shops, maintenance departments, custom work areas, R&D teams, and small production settings. The selection includes manual and semi-automatic cold saws for tubing, pipe, angle iron, and solid material, plus an abrasive saw for stationary abrasive cutting. Available features support straight cuts, miter cuts, repeat-length work, and stable workpiece holding.

Product Display:
Helpful Buying Guide

Choose a saw for your metal-cutting workflow

Start by deciding between cold-saw and abrasive-cutting configurations, then compare operation type, power requirements, angle range, workholding, and features that support repeat work. The machines represented here range from portable manual cold saws to pedestal-based semi-automatic and abrasive saws.

Visual Guide

Popular examples in this category

Use Cases

Match the saw to routine shop work

Manual cold saws suit controlled cutting for fabrication, maintenance, custom work, R&D, and small production runs. A semi-automatic cold saw adds push-button or foot-switch activation for routine cutting cycles. The abrasive saw is intended for stationary abrasive cutting in metalworking and maintenance settings.

How to Choose

Compare cutting control and power

Choose manual operation for direct operator control, or consider semi-automatic operation for controlled cutting cycles. Check the available electrical configuration: 110V single-phase, 220V three-phase, or 230/460V three-phase. Variable speed is available on one semi-automatic cold saw.

Applications

Plan for straight, angled, and repeat cuts

For angled work, compare miter ranges and direction. The cold saws offer mitering capability, including models with 45-degree right-and-left adjustment and one model that reaches 45 degrees right and 60 degrees left. Adjustable stops or stop rods can help with repeat-length parts.

Additional Info

Review holding, coolant, and machine setup

Workholding features include self-centering, cam-activated, cam-lock, pneumatic, and ground-plate vise arrangements. Several cold saws include flood or mechanical coolant systems. Base configurations include benchtop, pedestal, cabinet, and a removable stand for a more portable cold-saw setup.

2.5 in.Round-tube capacity

Listed for selected 1 HP manual cold saws.

60° leftMaximum listed left miter

Available on the semi-automatic cold saw.

14 in.Saw size

Represented in both semi-automatic cold saw and abrasive saw options.

3 power setupsElectrical configurations

110V single-phase, 220V three-phase, and 230/460V three-phase are represented.

Comparison Guide

Compare the represented machine types

Use this overview to focus on the operating style and features most relevant to the cutting work described for each machine type.

Machine typeWhat it supportsFeatures to compare
Manual cold sawControlled cutting of metal stock, including straight and miter cuts110V or 220V three-phase power, miter range, vise type, coolant system, stop rod or positive stop, stand or pedestal configuration
Semi-automatic cold sawControlled, repeatable cutting with push-button or foot-switch activation220V three-phase power, variable speed, 45° right/60° left mitering head, pneumatic vise, pedestal base, included accessories
Abrasive sawStationary abrasive cutting for metalworking and maintenance work230/460V three-phase power, indexed 90° and plus/minus 45° positions, cabinet and cast construction, vise plates, spark arrestor hookup
Planning Guide

Plan the right fit before choosing

Operation and cutting approach

Select manual, semi-automatic, or abrasive cutting

Manual cold saws provide direct control while positioning and cutting workpieces. The semi-automatic 14-inch cold saw supports controlled cycles activated by a push button or foot switch and includes variable speed. The 14-inch abrasive saw uses a spring-loaded whole-hand trigger for cutting control.

  • Manual cold saw options are available in 110V single-phase and 220V three-phase configurations.
  • The semi-automatic cold saw is 220V three-phase.
  • The abrasive saw is 230/460V three-phase.
Angles, positioning, and repeat work

Compare miter range and material-positioning features

Miter capability varies across the cold saw selection. Several models support 45-degree mitering, while the semi-automatic model rotates 45 degrees right and 60 degrees left of center. The abrasive saw locks at 90 degrees and plus or minus 45 degrees. For repeat parts, look for an adjustable positive stop or stop rod.

  • One 1 HP cold saw handles round tube up to 2.5 inches at 90 degrees.
  • A 1 HP manual cold saw lists 2.5-inch round-tube capacity at 90 and 45 degrees.
  • Vise designs support stable workpiece holding during cuts.
Coolant, bases, and included items

Choose features that fit the machine location and task

Cold-saw models may include flood coolant or a mechanical coolant pump with adjustable flow control. Pedestal and cabinet bases are represented for stable setup, while one manual cold saw has a removable stand. Included items vary by model and can include a blade, coolant, an adjustable positive stop, and a blade-change tool kit.

  • The semi-automatic cold saw includes a blade, coolant, adjustable positive stop, and blade-change tool kit.
  • One 12-1/2-inch manual cold saw includes a blade, coolant, pedestal base, adjustable positive stop, and tool kit.
  • The abrasive saw has a spark arrestor hookup for connection to dust collection.
FAQ

Common questions before buying

What is the difference between the cold saw and abrasive saw options represented here?

The cold saws are described for controlled cutting of metal stock and miter work. The abrasive saw is described for stationary abrasive cutting and includes a spark arrestor hookup.

Which models support repeat-length work?

Selected manual cold saws use a stop rod or adjustable positive stop, and the semi-automatic cold saw includes an adjustable positive stop.

What miter ranges are available?

Several cold saws support 45-degree mitering to the right or left. The semi-automatic cold saw reaches 45 degrees right and 60 degrees left, while the abrasive saw has indexed 90-degree and plus-or-minus-45-degree positions.

What power options should I compare?

The represented machines include 110V single-phase, 220V three-phase, and 230/460V three-phase configurations.

Helpful Buying Guide

Choose a saw for your metal-cutting workflow

Start by deciding between cold-saw and abrasive-cutting configurations, then compare operation type, power requirements, angle range, workholding, and features that support repeat work. The machines represented here range from portable manual cold saws to pedestal-based semi-automatic and abrasive saws.

Visual Guide

Popular examples in this category

Use Cases

Match the saw to routine shop work

Manual cold saws suit controlled cutting for fabrication, maintenance, custom work, R&D, and small production runs. A semi-automatic cold saw adds push-button or foot-switch activation for routine cutting cycles. The abrasive saw is intended for stationary abrasive cutting in metalworking and maintenance settings.

How to Choose

Compare cutting control and power

Choose manual operation for direct operator control, or consider semi-automatic operation for controlled cutting cycles. Check the available electrical configuration: 110V single-phase, 220V three-phase, or 230/460V three-phase. Variable speed is available on one semi-automatic cold saw.

Applications

Plan for straight, angled, and repeat cuts

For angled work, compare miter ranges and direction. The cold saws offer mitering capability, including models with 45-degree right-and-left adjustment and one model that reaches 45 degrees right and 60 degrees left. Adjustable stops or stop rods can help with repeat-length parts.

Additional Info

Review holding, coolant, and machine setup

Workholding features include self-centering, cam-activated, cam-lock, pneumatic, and ground-plate vise arrangements. Several cold saws include flood or mechanical coolant systems. Base configurations include benchtop, pedestal, cabinet, and a removable stand for a more portable cold-saw setup.

2.5 in.Round-tube capacity

Listed for selected 1 HP manual cold saws.

60° leftMaximum listed left miter

Available on the semi-automatic cold saw.

14 in.Saw size

Represented in both semi-automatic cold saw and abrasive saw options.

3 power setupsElectrical configurations

110V single-phase, 220V three-phase, and 230/460V three-phase are represented.

Comparison Guide

Compare the represented machine types

Use this overview to focus on the operating style and features most relevant to the cutting work described for each machine type.

Machine typeWhat it supportsFeatures to compare
Manual cold sawControlled cutting of metal stock, including straight and miter cuts110V or 220V three-phase power, miter range, vise type, coolant system, stop rod or positive stop, stand or pedestal configuration
Semi-automatic cold sawControlled, repeatable cutting with push-button or foot-switch activation220V three-phase power, variable speed, 45° right/60° left mitering head, pneumatic vise, pedestal base, included accessories
Abrasive sawStationary abrasive cutting for metalworking and maintenance work230/460V three-phase power, indexed 90° and plus/minus 45° positions, cabinet and cast construction, vise plates, spark arrestor hookup
Planning Guide

Plan the right fit before choosing

Operation and cutting approach

Select manual, semi-automatic, or abrasive cutting

Manual cold saws provide direct control while positioning and cutting workpieces. The semi-automatic 14-inch cold saw supports controlled cycles activated by a push button or foot switch and includes variable speed. The 14-inch abrasive saw uses a spring-loaded whole-hand trigger for cutting control.

  • Manual cold saw options are available in 110V single-phase and 220V three-phase configurations.
  • The semi-automatic cold saw is 220V three-phase.
  • The abrasive saw is 230/460V three-phase.
Angles, positioning, and repeat work

Compare miter range and material-positioning features

Miter capability varies across the cold saw selection. Several models support 45-degree mitering, while the semi-automatic model rotates 45 degrees right and 60 degrees left of center. The abrasive saw locks at 90 degrees and plus or minus 45 degrees. For repeat parts, look for an adjustable positive stop or stop rod.

  • One 1 HP cold saw handles round tube up to 2.5 inches at 90 degrees.
  • A 1 HP manual cold saw lists 2.5-inch round-tube capacity at 90 and 45 degrees.
  • Vise designs support stable workpiece holding during cuts.
Coolant, bases, and included items

Choose features that fit the machine location and task

Cold-saw models may include flood coolant or a mechanical coolant pump with adjustable flow control. Pedestal and cabinet bases are represented for stable setup, while one manual cold saw has a removable stand. Included items vary by model and can include a blade, coolant, an adjustable positive stop, and a blade-change tool kit.

  • The semi-automatic cold saw includes a blade, coolant, adjustable positive stop, and blade-change tool kit.
  • One 12-1/2-inch manual cold saw includes a blade, coolant, pedestal base, adjustable positive stop, and tool kit.
  • The abrasive saw has a spark arrestor hookup for connection to dust collection.
FAQ

Common questions before buying

What is the difference between the cold saw and abrasive saw options represented here?

The cold saws are described for controlled cutting of metal stock and miter work. The abrasive saw is described for stationary abrasive cutting and includes a spark arrestor hookup.

Which models support repeat-length work?

Selected manual cold saws use a stop rod or adjustable positive stop, and the semi-automatic cold saw includes an adjustable positive stop.

What miter ranges are available?

Several cold saws support 45-degree mitering to the right or left. The semi-automatic cold saw reaches 45 degrees right and 60 degrees left, while the abrasive saw has indexed 90-degree and plus-or-minus-45-degree positions.

What power options should I compare?

The represented machines include 110V single-phase, 220V three-phase, and 230/460V three-phase configurations.