-
Modine
108,000 BTU Steam or Hot Water Unit Heater with Explosion-Proof Motor
Our Price:$3,558.99This 108,000 BTU hydronic unit heater is designed for facility operators who need to distribute heat using steam or hot water. Its horizontal airflow and adjustable louvers help direct heated air...
-
Modine
165,000 BTU Hydronic Unit Heater with Explosion-Proof Motor
Our Price:$4,898.99This hydronic unit heater is designed for commercial buyers who need to distribute heat from a steam or hot-water system. Its 165,000 BTU capacity, horizontal airflow, and adjustable louvers help...
Hydronic Unit Heater Buying Guide
Choose a hydronic unit heater around the building layout, airflow direction, heating capacity, available electrical service, and the steam or hot-water system it will serve. The available models include horizontal units for directed airflow across open areas and vertical units that send heated air downward from elevated locations.
Popular examples in this category
Match airflow to the space
Horizontal units suit open areas and exterior-wall locations, while vertical units help bring heat down into occupied areas below high ceilings or obstructions.
Start with system and installation needs
Confirm compatibility with steam or hot water, then compare BTU capacity, airflow direction, voltage, mounting position, and desired heat-throw pattern.
Plan around building conditions
These heaters are represented for commercial and industrial building heating, including open areas, high-ceiling spaces, crane-way areas, and locations near windows.
Consider adjustment and access features
Selected horizontal models offer adjustable louvers, rotatable pipe connections, coil access through a two-piece casing, and suspension-ready mounting points. Selected vertical models offer air-deflector choices.
Available horizontal and vertical models cover a broad range of stated heating outputs.
Represented vertical models provide stated airflow values for comparison.
Electrical requirements vary by model and should match the installation plan.
Top and bottom connections can permit repositioning without changing piping.
Compare represented hydronic unit heater configurations
Use this overview to focus on the differences that affect heater placement and air distribution.
| Configuration | Best suited for | Features represented |
|---|---|---|
| Horizontal steam or hot-water unit heaters | Open areas and exterior-wall or window locations | Horizontal airflow; selected models have adjustable louvers or deflectors, top and bottom connections, and steam or hot-water operation. |
| Vertical hydronic unit heaters | High ceilings and mounting above obstructions | Downward air delivery; stated capacities from 95,000 to 333,000 BTU; air-deflector choices on selected models. |
| Vertical explosion-proof hydronic unit heater | High-ceiling spaces or locations above obstructions | Downward air delivery; 279,000 BTU; 5,460 CFM; four deflector options; 460V operation. |
Plan the right fit before choosing
Choose horizontal or vertical heat delivery
Horizontal hydronic unit heaters direct warmed air across the installation area and can help heat open spaces or offset heat loss along exterior walls and windows. Adjustable louvers or horizontal deflectors on selected models allow the heat throw to be directed. Vertical heaters deliver air downward, making them suited to high ceilings and installations above obstructions.
- Use horizontal airflow for open-area and exterior-wall heating layouts.
- Use vertical airflow where heat must be directed down from an elevated mounting position.
- Compare available deflector or louver options to match airflow spread and direction to the space.
Compare output, airflow, and voltage
Represented heating capacities range from 18,000 to 340,000 BTU. Listed vertical airflow values range from 1,665 to 5,980 CFM. Available electrical requirements represented include 115V and 460V, so the heater should be aligned with the planned electrical service.
- Select a BTU capacity appropriate for the building-heating application.
- Use stated CFM values when comparing represented vertical models.
- Verify whether the installation is designed for 115V or 460V service.
Review piping orientation and maintenance features
The represented horizontal units operate with steam or hot water. On selected models, top and bottom pipe connections support 360-degree rotation without changing the piping arrangement. Serpentine copper coils on selected models provide greater water-carrying capacity with lower friction loss and resistance to thermal shock, while two-piece casings provide access to the coil.
- Confirm the heater works with the existing steam or hot-water system.
- Consider rotatable connection arrangements where installation orientation may vary.
- For suspended installations, review models with tapped holes for threaded rod or an optional pipe hanger adapter kit.
Common questions before buying
Do these unit heaters use steam or hot water?
Represented horizontal models are designed for compatible steam or hot-water heating systems.
When is a vertical hydronic unit heater a good fit?
Vertical models are designed to direct heated air downward in high-ceiling spaces or where the heater must be installed above obstructions.
What capacity range is represented?
The represented products range from 18,000 BTU to 340,000 BTU.
Can airflow direction be adjusted?
Selected horizontal models have adjustable louvers or deflectors, and selected vertical models offer air-deflector choices for different heat-throw patterns.
Hydronic Unit Heater Buying Guide
Choose a hydronic unit heater around the building layout, airflow direction, heating capacity, available electrical service, and the steam or hot-water system it will serve. The available models include horizontal units for directed airflow across open areas and vertical units that send heated air downward from elevated locations.
Popular examples in this category
Match airflow to the space
Horizontal units suit open areas and exterior-wall locations, while vertical units help bring heat down into occupied areas below high ceilings or obstructions.
Start with system and installation needs
Confirm compatibility with steam or hot water, then compare BTU capacity, airflow direction, voltage, mounting position, and desired heat-throw pattern.
Plan around building conditions
These heaters are represented for commercial and industrial building heating, including open areas, high-ceiling spaces, crane-way areas, and locations near windows.
Consider adjustment and access features
Selected horizontal models offer adjustable louvers, rotatable pipe connections, coil access through a two-piece casing, and suspension-ready mounting points. Selected vertical models offer air-deflector choices.
Available horizontal and vertical models cover a broad range of stated heating outputs.
Represented vertical models provide stated airflow values for comparison.
Electrical requirements vary by model and should match the installation plan.
Top and bottom connections can permit repositioning without changing piping.
Compare represented hydronic unit heater configurations
Use this overview to focus on the differences that affect heater placement and air distribution.
| Configuration | Best suited for | Features represented |
|---|---|---|
| Horizontal steam or hot-water unit heaters | Open areas and exterior-wall or window locations | Horizontal airflow; selected models have adjustable louvers or deflectors, top and bottom connections, and steam or hot-water operation. |
| Vertical hydronic unit heaters | High ceilings and mounting above obstructions | Downward air delivery; stated capacities from 95,000 to 333,000 BTU; air-deflector choices on selected models. |
| Vertical explosion-proof hydronic unit heater | High-ceiling spaces or locations above obstructions | Downward air delivery; 279,000 BTU; 5,460 CFM; four deflector options; 460V operation. |
Plan the right fit before choosing
Choose horizontal or vertical heat delivery
Horizontal hydronic unit heaters direct warmed air across the installation area and can help heat open spaces or offset heat loss along exterior walls and windows. Adjustable louvers or horizontal deflectors on selected models allow the heat throw to be directed. Vertical heaters deliver air downward, making them suited to high ceilings and installations above obstructions.
- Use horizontal airflow for open-area and exterior-wall heating layouts.
- Use vertical airflow where heat must be directed down from an elevated mounting position.
- Compare available deflector or louver options to match airflow spread and direction to the space.
Compare output, airflow, and voltage
Represented heating capacities range from 18,000 to 340,000 BTU. Listed vertical airflow values range from 1,665 to 5,980 CFM. Available electrical requirements represented include 115V and 460V, so the heater should be aligned with the planned electrical service.
- Select a BTU capacity appropriate for the building-heating application.
- Use stated CFM values when comparing represented vertical models.
- Verify whether the installation is designed for 115V or 460V service.
Review piping orientation and maintenance features
The represented horizontal units operate with steam or hot water. On selected models, top and bottom pipe connections support 360-degree rotation without changing the piping arrangement. Serpentine copper coils on selected models provide greater water-carrying capacity with lower friction loss and resistance to thermal shock, while two-piece casings provide access to the coil.
- Confirm the heater works with the existing steam or hot-water system.
- Consider rotatable connection arrangements where installation orientation may vary.
- For suspended installations, review models with tapped holes for threaded rod or an optional pipe hanger adapter kit.
Common questions before buying
Do these unit heaters use steam or hot water?
Represented horizontal models are designed for compatible steam or hot-water heating systems.
When is a vertical hydronic unit heater a good fit?
Vertical models are designed to direct heated air downward in high-ceiling spaces or where the heater must be installed above obstructions.
What capacity range is represented?
The represented products range from 18,000 BTU to 340,000 BTU.
Can airflow direction be adjusted?
Selected horizontal models have adjustable louvers or deflectors, and selected vertical models offer air-deflector choices for different heat-throw patterns.
Choosing the right file folders
FilingSupplies.com carries end-tab folders for open-shelf systems, top-tab folders for drawer filing, and heavy-duty classification folders with dividers and fasteners for multi-section records. Pick letter or legal size, then choose material (11-pt, 14-pt, or 18-pt manila), optional reinforced tabs, color-coding, and expansion capacity to match your volume.
Folder FAQs
End-tab vs. top-tab — what’s the difference?
When should I choose classification folders?
Letter or legal size — how do I pick?
What tab and material options are available?
Can I add fasteners, pockets, or expansion?
Do you offer volume pricing or custom printing?
Outfitting classrooms that work all day
Build a durable, age-appropriate classroom with furniture, early-learning materials, storage bins, learning centers, and presentation tools. Choose adjustable pieces that grow with grades, label friendly bins for quick clean-up, and tech carts that secure, charge, and move easily.
Education FAQs
What safety labels should I look for on school and early-childhood items?
How do I pick classroom furniture across grade levels?
What’s the best way to organize supplies and centers?
How do I choose learning games and manipulatives by age?
What should I consider in a charging/tech cart?
Do you support school POs, bulk pricing, or custom printing?
Choosing the right labels
From color file labels to printable sheets, select the right size, adhesive, and print method to match your filing system and equipment. Decide on sheet vs. roll format, then pick permanent or removable adhesive and your color set.
Labels FAQs
Sheet vs. roll labels — what’s the difference?
Permanent or removable adhesive?
Will these labels work in my printer?
How do I match the label size to folder tabs or binder spines?
Can I get preprinted sequences or color bars?
Do you have templates?
Choosing the right tab dividers
Organize binders with preprinted or blank tabs. Select the number of tabs per set (5, 8, 10, or 12), choose paper with reinforced tabs or durable poly, and match letter or legal size for a clean fit.
Tab Dividers FAQs
What do 5-, 8-, 10-, or 12-tab sets mean?
Paper vs. poly — which should I choose?
Are the tabs printable?
Will they fit my binder?
Can I mix preprinted and blank tabs?
Do you make custom tab sets?
Choosing the right office supplies
From everyday paper and pens to binders, mailers, and desk organizers, pick durable, compatible options that match your equipment and team size. Start with the right paper and labeling, then add organizers that keep work moving.
Office Supplies FAQs
Which paper weight and brightness should I choose?
Round-ring vs. D-ring binders — what’s the difference?
What does “sheet capacity” mean on staplers and hole punches?
Will labels, envelopes, and mailers work with my printer?
How do I choose mailers and shipping boxes?
Do you offer eco-conscious options or bulk pricing?
Choosing the right sports & PE equipment
Equip classes, teams, and rec programs with durable balls, goals, cones, pinnies, storage, and safety gear. Match sizes and materials to age group and whether you play indoors or outdoors.
Sports & Athletics FAQs
What ball sizes should I choose for different ages?
- Basketball: Size 5 (27.5") youth, Size 6 (28.5") intermediate, Size 7 (29.5") official.
- Soccer: Size 3 up to ~8 years, Size 4 ~8–12, Size 5 ~12+.
- Volleyball: Regulation balls for teens/adults; lighter training balls for younger players.
Indoor vs. outdoor — which materials hold up best?
How many pinnies, cones, or markers do I need?
Tips for storage and care?
Are items latex‑free and school‑safe?
Do you support bulk orders or custom printing (team names)?
Choosing the right FireKing fireproof cabinet
FireKing fireproof file cabinets, safes, and storage cabinets are designed to protect important documents, records, and valuables from fire damage while keeping files organized and accessible. When choosing a FireKing cabinet, compare drawer configuration, storage type, fire rating, and overall capacity based on the records or materials you need to protect.
FireKing FAQs
What is the difference between FireKing vertical and lateral file cabinets?
What can I store in a FireKing fireproof file cabinet?
Are FireKing cabinets only for paper records?
How do I choose between a FireKing safe, file cabinet, or storage cabinet?
What sizes are available in FireKing cabinets?
Are FireKing cabinets used in offices, medical facilities, and government records storage?
Can I buy FireKing cabinets in bulk or get help choosing the right model?
Shipping & Policies
Do you offer free shipping?
What are your shipping rates?
- $6.95 for labels-only orders under $40
- $14.95 flat rate for everything else
47,000 BTU Steam or Hot Water Unit Heater with Explosion-Proof MotorWBB631209
Explosion-Proof Hydronic Unit Heater, 193,000 BTUWBB631211
108,000 BTU Steam or Hot Water Unit Heater with Explosion-Proof MotorWBB631216
Vertical Hydronic Unit Heater, 247,000 BTU, 115VWBB936342