Gas Unit Heaters

Gas unit heaters provide warm-air space heating for enclosed commercial, industrial, and work environments. This category includes gas-fired heaters for factories, warehouses, garages, barns, indoor work areas, and dusty shops, along with compatible conversion kits for changing certain unit heaters from natural gas to liquid propane.

Product Display:
Helpful Buying Guide

How to Choose a Gas Unit Heater

Start with the heating capacity and the type of space you need to warm, then compare fuel setup, venting approach, heat distribution, and installation configuration. The products represented here range from 30,000 to 400,000 BTU heating equipment, with options for natural gas, propane conversion, power venting, and separated combustion.

Visual Guide

Popular examples in this category

Use Cases

Match the heater to the workspace

Gas unit heaters are represented for factories, warehouses, commercial and industrial facilities, garages, barns used as workspaces, and indoor areas that need overhead heat. Separated-combustion models are also suited to woodworking shops and other dusty environments.

How to Choose

Compare capacity, fuel, and airflow

Compare BTU input or output with the heating requirement. Where stated, models cover up to 3,125, 5,000, or 6,700 square feet, while heat throw ratings range from 51 to 74 feet. Also confirm natural gas or propane needs and whether a compatible conversion kit is required.

Applications

Consider the installation layout

Power-vented models move exhaust outdoors through a single vent pipe. Other models support vertical or horizontal venting, and separated-combustion units use separate pipes for combustion-air intake and flue-gas exhaust. Low-profile units and ceiling-mount brackets support overhead applications where clearance matters.

Additional Info

Review directional and operating features

Adjustable or multi-position louvers help direct heated air. Selected models include intermittent pilot ignition, safety pressure switches, fan delay timers, permanently lubricated motors, reversible connections, 120-volt operation, steel construction, and aluminized steel heat exchangers.

30,000–400,000BTU ratings represented

The category includes lower-capacity through high-input gas unit heater options.

Up to 6,700 sq. ft.Stated coverage

A 200,000 BTU power-vented model is stated for large work areas up to this size.

51–74 ft.Listed heat throw range

Selected gas-fired models list heat distribution reaches within this range.

2 vent pipesSeparated-combustion venting

These models use separate combustion-air intake and flue-gas exhaust pipes.

Comparison Guide

Compare Gas Unit Heater Types

Use the product type, stated ratings, and installation features to narrow the available options.

Product typeRepresentative detailsWhat to compare
Power-vented gas unit heater150,000 or 200,000 BTU output; stated coverage up to 5,000 or 6,700 square feetSingle-pipe exhaust arrangement, coverage, louver positions, and aluminized steel heat exchanger
Gas-fired unit heater150,000, 200,000, 300,000, or 400,000 BTU input options; selected models list 120-volt operation and 51- to 74-foot heat throwInput and output ratings, heat throw, steel construction, venting direction, and installation orientation
Separated-combustion unit heater30,000 or 45,000 BTU natural gas options with outside combustion airTwo-pipe venting, low-profile mounting, control orientation, and suitability for dusty work areas
Planning Guide

Plan the right fit before choosing

1. Size the heating requirement

Use stated capacity and coverage details as your starting point

The available heater types include units with 30,000, 45,000, 125,000, 150,000, 200,000, 300,000, and 400,000 BTU ratings. Some listings provide both input and output values, which can help with comparison.

  • A 125,000 BTU model is stated for areas up to 3,125 square feet.
  • A 150,000 BTU power-vented model is stated for spaces up to 5,000 square feet.
  • A 200,000 BTU power-vented model is stated for spaces up to 6,700 square feet.
  • Listed heat throws include 51 feet, 55 feet, and 74 feet.
2. Select combustion, fuel, and venting

Choose a configuration that fits the intended equipment setup

Natural gas unit heaters are represented across the category, and conversion options support compatible heaters changing from natural gas to liquid propane. For spaces where combustion air should come from outside the heated area, separated-combustion models use fresh outside air rather than indoor space air.

  • Conversion kits are represented for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit or utility heaters.
  • One 125,000 BTU natural gas heater includes a liquid propane conversion kit.
  • Power-vented models exhaust through a single vent pipe.
  • Separated-combustion models use two-pipe venting for intake air and flue-gas exhaust.
3. Plan air direction and mounting

Compare airflow control and overhead installation features

Air distribution and mounting details can affect how a heater fits the work area. Adjustable louvers, three-position louvers, and high-velocity fans are represented for directing or circulating heated air. Several units support close-to-ceiling or overhead installation.

  • Low-profile models support close-to-ceiling installation.
  • Selected units include angle brackets or ceiling-mount brackets.
  • Some units allow connection or control orientation changes by flipping the unit and rotating discharge louvers.
  • A 400,000 BTU model has a level hanging mechanism for field adjustment.
FAQ

Common questions before buying

What gas unit heater capacities are represented?

The represented products range from 30,000 BTU to 400,000 BTU, with some models listing both BTU input and output.

Are propane options available?

The category includes a propane gas unit heater, a natural gas heater with an included LP conversion kit, and conversion kits for compatible heaters.

What is a separated-combustion unit heater?

It draws combustion air from outside the heated space rather than using indoor air. Represented models use separate pipes for combustion-air intake and flue-gas exhaust.

How can heated air be directed?

Selected models use adjustable louvers, three-position louvers, or reversible discharge louvers to help direct heated air.

Helpful Buying Guide

How to Choose a Gas Unit Heater

Start with the heating capacity and the type of space you need to warm, then compare fuel setup, venting approach, heat distribution, and installation configuration. The products represented here range from 30,000 to 400,000 BTU heating equipment, with options for natural gas, propane conversion, power venting, and separated combustion.

Visual Guide

Popular examples in this category

Use Cases

Match the heater to the workspace

Gas unit heaters are represented for factories, warehouses, commercial and industrial facilities, garages, barns used as workspaces, and indoor areas that need overhead heat. Separated-combustion models are also suited to woodworking shops and other dusty environments.

How to Choose

Compare capacity, fuel, and airflow

Compare BTU input or output with the heating requirement. Where stated, models cover up to 3,125, 5,000, or 6,700 square feet, while heat throw ratings range from 51 to 74 feet. Also confirm natural gas or propane needs and whether a compatible conversion kit is required.

Applications

Consider the installation layout

Power-vented models move exhaust outdoors through a single vent pipe. Other models support vertical or horizontal venting, and separated-combustion units use separate pipes for combustion-air intake and flue-gas exhaust. Low-profile units and ceiling-mount brackets support overhead applications where clearance matters.

Additional Info

Review directional and operating features

Adjustable or multi-position louvers help direct heated air. Selected models include intermittent pilot ignition, safety pressure switches, fan delay timers, permanently lubricated motors, reversible connections, 120-volt operation, steel construction, and aluminized steel heat exchangers.

30,000–400,000BTU ratings represented

The category includes lower-capacity through high-input gas unit heater options.

Up to 6,700 sq. ft.Stated coverage

A 200,000 BTU power-vented model is stated for large work areas up to this size.

51–74 ft.Listed heat throw range

Selected gas-fired models list heat distribution reaches within this range.

2 vent pipesSeparated-combustion venting

These models use separate combustion-air intake and flue-gas exhaust pipes.

Comparison Guide

Compare Gas Unit Heater Types

Use the product type, stated ratings, and installation features to narrow the available options.

Product typeRepresentative detailsWhat to compare
Power-vented gas unit heater150,000 or 200,000 BTU output; stated coverage up to 5,000 or 6,700 square feetSingle-pipe exhaust arrangement, coverage, louver positions, and aluminized steel heat exchanger
Gas-fired unit heater150,000, 200,000, 300,000, or 400,000 BTU input options; selected models list 120-volt operation and 51- to 74-foot heat throwInput and output ratings, heat throw, steel construction, venting direction, and installation orientation
Separated-combustion unit heater30,000 or 45,000 BTU natural gas options with outside combustion airTwo-pipe venting, low-profile mounting, control orientation, and suitability for dusty work areas
Planning Guide

Plan the right fit before choosing

1. Size the heating requirement

Use stated capacity and coverage details as your starting point

The available heater types include units with 30,000, 45,000, 125,000, 150,000, 200,000, 300,000, and 400,000 BTU ratings. Some listings provide both input and output values, which can help with comparison.

  • A 125,000 BTU model is stated for areas up to 3,125 square feet.
  • A 150,000 BTU power-vented model is stated for spaces up to 5,000 square feet.
  • A 200,000 BTU power-vented model is stated for spaces up to 6,700 square feet.
  • Listed heat throws include 51 feet, 55 feet, and 74 feet.
2. Select combustion, fuel, and venting

Choose a configuration that fits the intended equipment setup

Natural gas unit heaters are represented across the category, and conversion options support compatible heaters changing from natural gas to liquid propane. For spaces where combustion air should come from outside the heated area, separated-combustion models use fresh outside air rather than indoor space air.

  • Conversion kits are represented for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit or utility heaters.
  • One 125,000 BTU natural gas heater includes a liquid propane conversion kit.
  • Power-vented models exhaust through a single vent pipe.
  • Separated-combustion models use two-pipe venting for intake air and flue-gas exhaust.
3. Plan air direction and mounting

Compare airflow control and overhead installation features

Air distribution and mounting details can affect how a heater fits the work area. Adjustable louvers, three-position louvers, and high-velocity fans are represented for directing or circulating heated air. Several units support close-to-ceiling or overhead installation.

  • Low-profile models support close-to-ceiling installation.
  • Selected units include angle brackets or ceiling-mount brackets.
  • Some units allow connection or control orientation changes by flipping the unit and rotating discharge louvers.
  • A 400,000 BTU model has a level hanging mechanism for field adjustment.
FAQ

Common questions before buying

What gas unit heater capacities are represented?

The represented products range from 30,000 BTU to 400,000 BTU, with some models listing both BTU input and output.

Are propane options available?

The category includes a propane gas unit heater, a natural gas heater with an included LP conversion kit, and conversion kits for compatible heaters.

What is a separated-combustion unit heater?

It draws combustion air from outside the heated space rather than using indoor air. Represented models use separate pipes for combustion-air intake and flue-gas exhaust.

How can heated air be directed?

Selected models use adjustable louvers, three-position louvers, or reversible discharge louvers to help direct heated air.

Helpful Buying Guide

Choose a Gas Unit Heater for Your Indoor Space

Compare gas unit heaters by heating capacity, fuel and conversion needs, venting approach, airflow direction, mounting profile, and the features suited to the environment being heated. The available products span lower-profile separated-combustion units through high-capacity gas-fired heaters for large work areas.

Visual Guide

Popular examples in this category

Use Cases

Heat workspaces of different sizes

Available heaters range from 30,000 BTU low-profile units for dusty shops to 400,000 BTU gas-fired units for high-input commercial and industrial space heating. Listed applications include factories, warehouses, garages, barns, woodworking shops, and indoor work areas.

How to Choose

Start with capacity and fuel

Match the heater’s stated BTU rating, output where provided, and listed area coverage to the intended space. Confirm whether natural gas, propane, an included LP conversion kit, field propane conversion, or a separate compatible conversion kit fits the application.

Applications

Consider the installation environment

Separated-combustion models use outside air for combustion and are identified for woodworking shops and other dusty environments. Low-profile designs support close-to-ceiling installation, while power-vented models move exhaust outdoors through a single vent pipe.

Additional Information

Compare airflow and connection details

Look for adjustable or locking louvers when directing warm air matters. Some units list heat throw, fan-assisted circulation, 120V operation, reversible connections, ceiling brackets, or flexible vertical and horizontal venting.

30,000–400,000BTU range represented

Available gas-fired heater capacities span compact to high-input space-heating applications.

Up to 6,700 sq. ft.Listed coverage

The 200,000 BTU power-vented heater is listed for spaces up to this size.

74 ft.Listed maximum heat throw

The 300,000 BTU input high-efficiency heater lists a 74-foot heat throw.

120VElectrical operation listed

Selected high-efficiency heaters specify 120-volt operation.

Comparison Guide

Compare the main product types

Use this overview to distinguish the heater and conversion-kit configurations represented in the category.

Product typeBest-fit considerationsFeatures represented
Power-vented gas unit heatersLarge factory and warehouse areas; models list coverage up to 6,700 square feet.Single-pipe exhaust venting, three-position louvers, fan-assisted airflow, and aluminized steel heat exchangers.
Low-profile separated-combustion heatersWoodworking shops and other dusty environments; close-to-ceiling applications.Outdoor combustion air, dual vents, low-profile mounting, reversible connections, and permanently lubricated motors.
High-efficiency gas-fired heaters and conversion optionsIndoor commercial or industrial work areas and compatible fuel-conversion applications.Specified input and output ratings, listed heat throw, steel construction, 120V operation, and natural gas-to-LP conversion options.
Planning Guide

Plan the right fit before choosing

Match the heater to the space

Compare heating capacity, coverage, and heat throw

BTU ratings represented in this category range from 30,000 to 400,000 BTU. Some models provide additional comparison details, including stated coverage up to 3,125, 5,000, or 6,700 square feet, usable output ratings, and heat throw measurements.

  • A 125,000 BTU unit is listed for areas up to 3,125 square feet.
  • A 150,000 BTU power-vented unit is listed for areas up to 5,000 square feet.
  • A 200,000 BTU power-vented unit is listed for areas up to 6,700 square feet.
  • High-efficiency models list 51-, 55-, or 74-foot heat throw, depending on model.
Choose venting and combustion features

Select a configuration that fits the intended environment

Power-vented heaters use a single vent pipe to move exhaust outdoors. Other models offer flexible vertical or horizontal venting with a power exhaust that can rotate 180 degrees. For dusty areas, separated-combustion heaters draw combustion air from outside the heated space and use separate vent pipes for combustion-air intake and flue-gas exhaust.

  • Power-exhaust designs include a collector box and power exhauster.
  • Safety pressure switches help assure or verify safe venting conditions.
  • Separated-combustion designs are identified for woodworking shops and other dusty environments.
  • Intermittent pilot ignition is listed with 100% shutoff and continuous retry on certain models.
Plan fuel, mounting, and air direction

Review conversion, ceiling clearance, and airflow control

Several options support natural gas-to-liquid-propane conversion, but compatibility varies by heater. Buyers can also compare low-profile mounting, included angle brackets, ceiling-mount brackets, reversible connections, louvers, and fan-assisted airflow before selecting a unit or conversion kit.

  • Separate conversion kits are listed for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.
  • One 125,000 BTU natural gas heater includes an LP conversion kit.
  • A 400,000 BTU model lists field propane conversion.
  • Low-profile models support close-to-ceiling installation and may have reversible connections.
FAQ

Common questions before buying

What types of gas unit heaters are included?

The category includes power-vented heaters, low-profile separated-combustion natural gas heaters, high-efficiency gas-fired unit heaters, and natural gas-to-LP conversion kits for stated compatible heater capacities.

Which heaters are suited to dusty environments?

The 30,000 BTU and 45,000 BTU low-profile separated-combustion natural gas heaters are identified for woodworking shops and other dusty environments. They use outside air for combustion rather than air from the heated space.

Can these heaters be converted from natural gas to propane?

Some products include an LP conversion kit or list field propane conversion. Separate kits are also available for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.

How can I compare airflow direction?

Look for adjustable louvers, three-position locking louvers, rotating discharge louvers, fan-assisted airflow, and listed heat throw. These features help compare how a model directs or projects heated air.

Helpful Buying Guide

Choose a Gas Unit Heater for Your Indoor Space

Compare gas unit heaters by heating capacity, fuel and conversion needs, venting approach, airflow direction, mounting profile, and the features suited to the environment being heated. The available products span lower-profile separated-combustion units through high-capacity gas-fired heaters for large work areas.

Visual Guide

Popular examples in this category

Use Cases

Heat workspaces of different sizes

Available heaters range from 30,000 BTU low-profile units for dusty shops to 400,000 BTU gas-fired units for high-input commercial and industrial space heating. Listed applications include factories, warehouses, garages, barns, woodworking shops, and indoor work areas.

How to Choose

Start with capacity and fuel

Match the heater’s stated BTU rating, output where provided, and listed area coverage to the intended space. Confirm whether natural gas, propane, an included LP conversion kit, field propane conversion, or a separate compatible conversion kit fits the application.

Applications

Consider the installation environment

Separated-combustion models use outside air for combustion and are identified for woodworking shops and other dusty environments. Low-profile designs support close-to-ceiling installation, while power-vented models move exhaust outdoors through a single vent pipe.

Additional Information

Compare airflow and connection details

Look for adjustable or locking louvers when directing warm air matters. Some units list heat throw, fan-assisted circulation, 120V operation, reversible connections, ceiling brackets, or flexible vertical and horizontal venting.

30,000–400,000BTU range represented

Available gas-fired heater capacities span compact to high-input space-heating applications.

Up to 6,700 sq. ft.Listed coverage

The 200,000 BTU power-vented heater is listed for spaces up to this size.

74 ft.Listed maximum heat throw

The 300,000 BTU input high-efficiency heater lists a 74-foot heat throw.

120VElectrical operation listed

Selected high-efficiency heaters specify 120-volt operation.

Comparison Guide

Compare the main product types

Use this overview to distinguish the heater and conversion-kit configurations represented in the category.

Product typeBest-fit considerationsFeatures represented
Power-vented gas unit heatersLarge factory and warehouse areas; models list coverage up to 6,700 square feet.Single-pipe exhaust venting, three-position louvers, fan-assisted airflow, and aluminized steel heat exchangers.
Low-profile separated-combustion heatersWoodworking shops and other dusty environments; close-to-ceiling applications.Outdoor combustion air, dual vents, low-profile mounting, reversible connections, and permanently lubricated motors.
High-efficiency gas-fired heaters and conversion optionsIndoor commercial or industrial work areas and compatible fuel-conversion applications.Specified input and output ratings, listed heat throw, steel construction, 120V operation, and natural gas-to-LP conversion options.
Planning Guide

Plan the right fit before choosing

Match the heater to the space

Compare heating capacity, coverage, and heat throw

BTU ratings represented in this category range from 30,000 to 400,000 BTU. Some models provide additional comparison details, including stated coverage up to 3,125, 5,000, or 6,700 square feet, usable output ratings, and heat throw measurements.

  • A 125,000 BTU unit is listed for areas up to 3,125 square feet.
  • A 150,000 BTU power-vented unit is listed for areas up to 5,000 square feet.
  • A 200,000 BTU power-vented unit is listed for areas up to 6,700 square feet.
  • High-efficiency models list 51-, 55-, or 74-foot heat throw, depending on model.
Choose venting and combustion features

Select a configuration that fits the intended environment

Power-vented heaters use a single vent pipe to move exhaust outdoors. Other models offer flexible vertical or horizontal venting with a power exhaust that can rotate 180 degrees. For dusty areas, separated-combustion heaters draw combustion air from outside the heated space and use separate vent pipes for combustion-air intake and flue-gas exhaust.

  • Power-exhaust designs include a collector box and power exhauster.
  • Safety pressure switches help assure or verify safe venting conditions.
  • Separated-combustion designs are identified for woodworking shops and other dusty environments.
  • Intermittent pilot ignition is listed with 100% shutoff and continuous retry on certain models.
Plan fuel, mounting, and air direction

Review conversion, ceiling clearance, and airflow control

Several options support natural gas-to-liquid-propane conversion, but compatibility varies by heater. Buyers can also compare low-profile mounting, included angle brackets, ceiling-mount brackets, reversible connections, louvers, and fan-assisted airflow before selecting a unit or conversion kit.

  • Separate conversion kits are listed for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.
  • One 125,000 BTU natural gas heater includes an LP conversion kit.
  • A 400,000 BTU model lists field propane conversion.
  • Low-profile models support close-to-ceiling installation and may have reversible connections.
FAQ

Common questions before buying

What types of gas unit heaters are included?

The category includes power-vented heaters, low-profile separated-combustion natural gas heaters, high-efficiency gas-fired unit heaters, and natural gas-to-LP conversion kits for stated compatible heater capacities.

Which heaters are suited to dusty environments?

The 30,000 BTU and 45,000 BTU low-profile separated-combustion natural gas heaters are identified for woodworking shops and other dusty environments. They use outside air for combustion rather than air from the heated space.

Can these heaters be converted from natural gas to propane?

Some products include an LP conversion kit or list field propane conversion. Separate kits are also available for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.

How can I compare airflow direction?

Look for adjustable louvers, three-position locking louvers, rotating discharge louvers, fan-assisted airflow, and listed heat throw. These features help compare how a model directs or projects heated air.

Helpful Buying Guide

Choose a Gas Unit Heater for Your Indoor Space

Compare gas unit heaters by heating capacity, fuel and conversion needs, venting approach, airflow direction, mounting profile, and the features suited to the environment being heated. The available products span lower-profile separated-combustion units through high-capacity gas-fired heaters for large work areas.

Visual Guide

Popular examples in this category

Use Cases

Heat workspaces of different sizes

Available heaters range from 30,000 BTU low-profile units for dusty shops to 400,000 BTU gas-fired units for high-input commercial and industrial space heating. Listed applications include factories, warehouses, garages, barns, woodworking shops, and indoor work areas.

How to Choose

Start with capacity and fuel

Match the heater’s stated BTU rating, output where provided, and listed area coverage to the intended space. Confirm whether natural gas, propane, an included LP conversion kit, field propane conversion, or a separate compatible conversion kit fits the application.

Applications

Consider the installation environment

Separated-combustion models use outside air for combustion and are identified for woodworking shops and other dusty environments. Low-profile designs support close-to-ceiling installation, while power-vented models move exhaust outdoors through a single vent pipe.

Additional Information

Compare airflow and connection details

Look for adjustable or locking louvers when directing warm air matters. Some units list heat throw, fan-assisted circulation, 120V operation, reversible connections, ceiling brackets, or flexible vertical and horizontal venting.

30,000–400,000BTU range represented

Available gas-fired heater capacities span compact to high-input space-heating applications.

Up to 6,700 sq. ft.Listed coverage

The 200,000 BTU power-vented heater is listed for spaces up to this size.

74 ft.Listed maximum heat throw

The 300,000 BTU input high-efficiency heater lists a 74-foot heat throw.

120VElectrical operation listed

Selected high-efficiency heaters specify 120-volt operation.

Comparison Guide

Compare the main product types

Use this overview to distinguish the heater and conversion-kit configurations represented in the category.

Product typeBest-fit considerationsFeatures represented
Power-vented gas unit heatersLarge factory and warehouse areas; models list coverage up to 6,700 square feet.Single-pipe exhaust venting, three-position louvers, fan-assisted airflow, and aluminized steel heat exchangers.
Low-profile separated-combustion heatersWoodworking shops and other dusty environments; close-to-ceiling applications.Outdoor combustion air, dual vents, low-profile mounting, reversible connections, and permanently lubricated motors.
High-efficiency gas-fired heaters and conversion optionsIndoor commercial or industrial work areas and compatible fuel-conversion applications.Specified input and output ratings, listed heat throw, steel construction, 120V operation, and natural gas-to-LP conversion options.
Planning Guide

Plan the right fit before choosing

Match the heater to the space

Compare heating capacity, coverage, and heat throw

BTU ratings represented in this category range from 30,000 to 400,000 BTU. Some models provide additional comparison details, including stated coverage up to 3,125, 5,000, or 6,700 square feet, usable output ratings, and heat throw measurements.

  • A 125,000 BTU unit is listed for areas up to 3,125 square feet.
  • A 150,000 BTU power-vented unit is listed for areas up to 5,000 square feet.
  • A 200,000 BTU power-vented unit is listed for areas up to 6,700 square feet.
  • High-efficiency models list 51-, 55-, or 74-foot heat throw, depending on model.
Choose venting and combustion features

Select a configuration that fits the intended environment

Power-vented heaters use a single vent pipe to move exhaust outdoors. Other models offer flexible vertical or horizontal venting with a power exhaust that can rotate 180 degrees. For dusty areas, separated-combustion heaters draw combustion air from outside the heated space and use separate vent pipes for combustion-air intake and flue-gas exhaust.

  • Power-exhaust designs include a collector box and power exhauster.
  • Safety pressure switches help assure or verify safe venting conditions.
  • Separated-combustion designs are identified for woodworking shops and other dusty environments.
  • Intermittent pilot ignition is listed with 100% shutoff and continuous retry on certain models.
Plan fuel, mounting, and air direction

Review conversion, ceiling clearance, and airflow control

Several options support natural gas-to-liquid-propane conversion, but compatibility varies by heater. Buyers can also compare low-profile mounting, included angle brackets, ceiling-mount brackets, reversible connections, louvers, and fan-assisted airflow before selecting a unit or conversion kit.

  • Separate conversion kits are listed for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.
  • One 125,000 BTU natural gas heater includes an LP conversion kit.
  • A 400,000 BTU model lists field propane conversion.
  • Low-profile models support close-to-ceiling installation and may have reversible connections.
FAQ

Common questions before buying

What types of gas unit heaters are included?

The category includes power-vented heaters, low-profile separated-combustion natural gas heaters, high-efficiency gas-fired unit heaters, and natural gas-to-LP conversion kits for stated compatible heater capacities.

Which heaters are suited to dusty environments?

The 30,000 BTU and 45,000 BTU low-profile separated-combustion natural gas heaters are identified for woodworking shops and other dusty environments. They use outside air for combustion rather than air from the heated space.

Can these heaters be converted from natural gas to propane?

Some products include an LP conversion kit or list field propane conversion. Separate kits are also available for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.

How can I compare airflow direction?

Look for adjustable louvers, three-position locking louvers, rotating discharge louvers, fan-assisted airflow, and listed heat throw. These features help compare how a model directs or projects heated air.

Helpful Buying Guide

Choose a Gas Unit Heater for Your Indoor Space

Compare gas unit heaters by heating capacity, fuel and conversion needs, venting approach, airflow direction, mounting profile, and the features suited to the environment being heated. The available products span lower-profile separated-combustion units through high-capacity gas-fired heaters for large work areas.

Visual Guide

Popular examples in this category

Use Cases

Heat workspaces of different sizes

Available heaters range from 30,000 BTU low-profile units for dusty shops to 400,000 BTU gas-fired units for high-input commercial and industrial space heating. Listed applications include factories, warehouses, garages, barns, woodworking shops, and indoor work areas.

How to Choose

Start with capacity and fuel

Match the heater’s stated BTU rating, output where provided, and listed area coverage to the intended space. Confirm whether natural gas, propane, an included LP conversion kit, field propane conversion, or a separate compatible conversion kit fits the application.

Applications

Consider the installation environment

Separated-combustion models use outside air for combustion and are identified for woodworking shops and other dusty environments. Low-profile designs support close-to-ceiling installation, while power-vented models move exhaust outdoors through a single vent pipe.

Additional Information

Compare airflow and connection details

Look for adjustable or locking louvers when directing warm air matters. Some units list heat throw, fan-assisted circulation, 120V operation, reversible connections, ceiling brackets, or flexible vertical and horizontal venting.

30,000–400,000BTU range represented

Available gas-fired heater capacities span compact to high-input space-heating applications.

Up to 6,700 sq. ft.Listed coverage

The 200,000 BTU power-vented heater is listed for spaces up to this size.

74 ft.Listed maximum heat throw

The 300,000 BTU input high-efficiency heater lists a 74-foot heat throw.

120VElectrical operation listed

Selected high-efficiency heaters specify 120-volt operation.

Comparison Guide

Compare the main product types

Use this overview to distinguish the heater and conversion-kit configurations represented in the category.

Product typeBest-fit considerationsFeatures represented
Power-vented gas unit heatersLarge factory and warehouse areas; models list coverage up to 6,700 square feet.Single-pipe exhaust venting, three-position louvers, fan-assisted airflow, and aluminized steel heat exchangers.
Low-profile separated-combustion heatersWoodworking shops and other dusty environments; close-to-ceiling applications.Outdoor combustion air, dual vents, low-profile mounting, reversible connections, and permanently lubricated motors.
High-efficiency gas-fired heaters and conversion optionsIndoor commercial or industrial work areas and compatible fuel-conversion applications.Specified input and output ratings, listed heat throw, steel construction, 120V operation, and natural gas-to-LP conversion options.
Planning Guide

Plan the right fit before choosing

Match the heater to the space

Compare heating capacity, coverage, and heat throw

BTU ratings represented in this category range from 30,000 to 400,000 BTU. Some models provide additional comparison details, including stated coverage up to 3,125, 5,000, or 6,700 square feet, usable output ratings, and heat throw measurements.

  • A 125,000 BTU unit is listed for areas up to 3,125 square feet.
  • A 150,000 BTU power-vented unit is listed for areas up to 5,000 square feet.
  • A 200,000 BTU power-vented unit is listed for areas up to 6,700 square feet.
  • High-efficiency models list 51-, 55-, or 74-foot heat throw, depending on model.
Choose venting and combustion features

Select a configuration that fits the intended environment

Power-vented heaters use a single vent pipe to move exhaust outdoors. Other models offer flexible vertical or horizontal venting with a power exhaust that can rotate 180 degrees. For dusty areas, separated-combustion heaters draw combustion air from outside the heated space and use separate vent pipes for combustion-air intake and flue-gas exhaust.

  • Power-exhaust designs include a collector box and power exhauster.
  • Safety pressure switches help assure or verify safe venting conditions.
  • Separated-combustion designs are identified for woodworking shops and other dusty environments.
  • Intermittent pilot ignition is listed with 100% shutoff and continuous retry on certain models.
Plan fuel, mounting, and air direction

Review conversion, ceiling clearance, and airflow control

Several options support natural gas-to-liquid-propane conversion, but compatibility varies by heater. Buyers can also compare low-profile mounting, included angle brackets, ceiling-mount brackets, reversible connections, louvers, and fan-assisted airflow before selecting a unit or conversion kit.

  • Separate conversion kits are listed for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.
  • One 125,000 BTU natural gas heater includes an LP conversion kit.
  • A 400,000 BTU model lists field propane conversion.
  • Low-profile models support close-to-ceiling installation and may have reversible connections.
FAQ

Common questions before buying

What types of gas unit heaters are included?

The category includes power-vented heaters, low-profile separated-combustion natural gas heaters, high-efficiency gas-fired unit heaters, and natural gas-to-LP conversion kits for stated compatible heater capacities.

Which heaters are suited to dusty environments?

The 30,000 BTU and 45,000 BTU low-profile separated-combustion natural gas heaters are identified for woodworking shops and other dusty environments. They use outside air for combustion rather than air from the heated space.

Can these heaters be converted from natural gas to propane?

Some products include an LP conversion kit or list field propane conversion. Separate kits are also available for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.

How can I compare airflow direction?

Look for adjustable louvers, three-position locking louvers, rotating discharge louvers, fan-assisted airflow, and listed heat throw. These features help compare how a model directs or projects heated air.

Helpful Buying Guide

Choose a Gas Unit Heater for Your Indoor Space

Compare gas unit heaters by heating capacity, fuel and conversion needs, venting approach, airflow direction, mounting profile, and the features suited to the environment being heated. The available products span lower-profile separated-combustion units through high-capacity gas-fired heaters for large work areas.

Visual Guide

Popular examples in this category

Use Cases

Heat workspaces of different sizes

Available heaters range from 30,000 BTU low-profile units for dusty shops to 400,000 BTU gas-fired units for high-input commercial and industrial space heating. Listed applications include factories, warehouses, garages, barns, woodworking shops, and indoor work areas.

How to Choose

Start with capacity and fuel

Match the heater’s stated BTU rating, output where provided, and listed area coverage to the intended space. Confirm whether natural gas, propane, an included LP conversion kit, field propane conversion, or a separate compatible conversion kit fits the application.

Applications

Consider the installation environment

Separated-combustion models use outside air for combustion and are identified for woodworking shops and other dusty environments. Low-profile designs support close-to-ceiling installation, while power-vented models move exhaust outdoors through a single vent pipe.

Additional Information

Compare airflow and connection details

Look for adjustable or locking louvers when directing warm air matters. Some units list heat throw, fan-assisted circulation, 120V operation, reversible connections, ceiling brackets, or flexible vertical and horizontal venting.

30,000–400,000BTU range represented

Available gas-fired heater capacities span compact to high-input space-heating applications.

Up to 6,700 sq. ft.Listed coverage

The 200,000 BTU power-vented heater is listed for spaces up to this size.

74 ft.Listed maximum heat throw

The 300,000 BTU input high-efficiency heater lists a 74-foot heat throw.

120VElectrical operation listed

Selected high-efficiency heaters specify 120-volt operation.

Comparison Guide

Compare the main product types

Use this overview to distinguish the heater and conversion-kit configurations represented in the category.

Product typeBest-fit considerationsFeatures represented
Power-vented gas unit heatersLarge factory and warehouse areas; models list coverage up to 6,700 square feet.Single-pipe exhaust venting, three-position louvers, fan-assisted airflow, and aluminized steel heat exchangers.
Low-profile separated-combustion heatersWoodworking shops and other dusty environments; close-to-ceiling applications.Outdoor combustion air, dual vents, low-profile mounting, reversible connections, and permanently lubricated motors.
High-efficiency gas-fired heaters and conversion optionsIndoor commercial or industrial work areas and compatible fuel-conversion applications.Specified input and output ratings, listed heat throw, steel construction, 120V operation, and natural gas-to-LP conversion options.
Planning Guide

Plan the right fit before choosing

Match the heater to the space

Compare heating capacity, coverage, and heat throw

BTU ratings represented in this category range from 30,000 to 400,000 BTU. Some models provide additional comparison details, including stated coverage up to 3,125, 5,000, or 6,700 square feet, usable output ratings, and heat throw measurements.

  • A 125,000 BTU unit is listed for areas up to 3,125 square feet.
  • A 150,000 BTU power-vented unit is listed for areas up to 5,000 square feet.
  • A 200,000 BTU power-vented unit is listed for areas up to 6,700 square feet.
  • High-efficiency models list 51-, 55-, or 74-foot heat throw, depending on model.
Choose venting and combustion features

Select a configuration that fits the intended environment

Power-vented heaters use a single vent pipe to move exhaust outdoors. Other models offer flexible vertical or horizontal venting with a power exhaust that can rotate 180 degrees. For dusty areas, separated-combustion heaters draw combustion air from outside the heated space and use separate vent pipes for combustion-air intake and flue-gas exhaust.

  • Power-exhaust designs include a collector box and power exhauster.
  • Safety pressure switches help assure or verify safe venting conditions.
  • Separated-combustion designs are identified for woodworking shops and other dusty environments.
  • Intermittent pilot ignition is listed with 100% shutoff and continuous retry on certain models.
Plan fuel, mounting, and air direction

Review conversion, ceiling clearance, and airflow control

Several options support natural gas-to-liquid-propane conversion, but compatibility varies by heater. Buyers can also compare low-profile mounting, included angle brackets, ceiling-mount brackets, reversible connections, louvers, and fan-assisted airflow before selecting a unit or conversion kit.

  • Separate conversion kits are listed for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.
  • One 125,000 BTU natural gas heater includes an LP conversion kit.
  • A 400,000 BTU model lists field propane conversion.
  • Low-profile models support close-to-ceiling installation and may have reversible connections.
FAQ

Common questions before buying

What types of gas unit heaters are included?

The category includes power-vented heaters, low-profile separated-combustion natural gas heaters, high-efficiency gas-fired unit heaters, and natural gas-to-LP conversion kits for stated compatible heater capacities.

Which heaters are suited to dusty environments?

The 30,000 BTU and 45,000 BTU low-profile separated-combustion natural gas heaters are identified for woodworking shops and other dusty environments. They use outside air for combustion rather than air from the heated space.

Can these heaters be converted from natural gas to propane?

Some products include an LP conversion kit or list field propane conversion. Separate kits are also available for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.

How can I compare airflow direction?

Look for adjustable louvers, three-position locking louvers, rotating discharge louvers, fan-assisted airflow, and listed heat throw. These features help compare how a model directs or projects heated air.

Helpful Buying Guide

Choose a Gas Unit Heater for Your Indoor Space

Compare gas unit heaters by heating capacity, fuel and conversion needs, venting approach, airflow direction, mounting profile, and the features suited to the environment being heated. The available products span lower-profile separated-combustion units through high-capacity gas-fired heaters for large work areas.

Visual Guide

Popular examples in this category

Use Cases

Heat workspaces of different sizes

Available heaters range from 30,000 BTU low-profile units for dusty shops to 400,000 BTU gas-fired units for high-input commercial and industrial space heating. Listed applications include factories, warehouses, garages, barns, woodworking shops, and indoor work areas.

How to Choose

Start with capacity and fuel

Match the heater’s stated BTU rating, output where provided, and listed area coverage to the intended space. Confirm whether natural gas, propane, an included LP conversion kit, field propane conversion, or a separate compatible conversion kit fits the application.

Applications

Consider the installation environment

Separated-combustion models use outside air for combustion and are identified for woodworking shops and other dusty environments. Low-profile designs support close-to-ceiling installation, while power-vented models move exhaust outdoors through a single vent pipe.

Additional Information

Compare airflow and connection details

Look for adjustable or locking louvers when directing warm air matters. Some units list heat throw, fan-assisted circulation, 120V operation, reversible connections, ceiling brackets, or flexible vertical and horizontal venting.

30,000–400,000BTU range represented

Available gas-fired heater capacities span compact to high-input space-heating applications.

Up to 6,700 sq. ft.Listed coverage

The 200,000 BTU power-vented heater is listed for spaces up to this size.

74 ft.Listed maximum heat throw

The 300,000 BTU input high-efficiency heater lists a 74-foot heat throw.

120VElectrical operation listed

Selected high-efficiency heaters specify 120-volt operation.

Comparison Guide

Compare the main product types

Use this overview to distinguish the heater and conversion-kit configurations represented in the category.

Product typeBest-fit considerationsFeatures represented
Power-vented gas unit heatersLarge factory and warehouse areas; models list coverage up to 6,700 square feet.Single-pipe exhaust venting, three-position louvers, fan-assisted airflow, and aluminized steel heat exchangers.
Low-profile separated-combustion heatersWoodworking shops and other dusty environments; close-to-ceiling applications.Outdoor combustion air, dual vents, low-profile mounting, reversible connections, and permanently lubricated motors.
High-efficiency gas-fired heaters and conversion optionsIndoor commercial or industrial work areas and compatible fuel-conversion applications.Specified input and output ratings, listed heat throw, steel construction, 120V operation, and natural gas-to-LP conversion options.
Planning Guide

Plan the right fit before choosing

Match the heater to the space

Compare heating capacity, coverage, and heat throw

BTU ratings represented in this category range from 30,000 to 400,000 BTU. Some models provide additional comparison details, including stated coverage up to 3,125, 5,000, or 6,700 square feet, usable output ratings, and heat throw measurements.

  • A 125,000 BTU unit is listed for areas up to 3,125 square feet.
  • A 150,000 BTU power-vented unit is listed for areas up to 5,000 square feet.
  • A 200,000 BTU power-vented unit is listed for areas up to 6,700 square feet.
  • High-efficiency models list 51-, 55-, or 74-foot heat throw, depending on model.
Choose venting and combustion features

Select a configuration that fits the intended environment

Power-vented heaters use a single vent pipe to move exhaust outdoors. Other models offer flexible vertical or horizontal venting with a power exhaust that can rotate 180 degrees. For dusty areas, separated-combustion heaters draw combustion air from outside the heated space and use separate vent pipes for combustion-air intake and flue-gas exhaust.

  • Power-exhaust designs include a collector box and power exhauster.
  • Safety pressure switches help assure or verify safe venting conditions.
  • Separated-combustion designs are identified for woodworking shops and other dusty environments.
  • Intermittent pilot ignition is listed with 100% shutoff and continuous retry on certain models.
Plan fuel, mounting, and air direction

Review conversion, ceiling clearance, and airflow control

Several options support natural gas-to-liquid-propane conversion, but compatibility varies by heater. Buyers can also compare low-profile mounting, included angle brackets, ceiling-mount brackets, reversible connections, louvers, and fan-assisted airflow before selecting a unit or conversion kit.

  • Separate conversion kits are listed for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.
  • One 125,000 BTU natural gas heater includes an LP conversion kit.
  • A 400,000 BTU model lists field propane conversion.
  • Low-profile models support close-to-ceiling installation and may have reversible connections.
FAQ

Common questions before buying

What types of gas unit heaters are included?

The category includes power-vented heaters, low-profile separated-combustion natural gas heaters, high-efficiency gas-fired unit heaters, and natural gas-to-LP conversion kits for stated compatible heater capacities.

Which heaters are suited to dusty environments?

The 30,000 BTU and 45,000 BTU low-profile separated-combustion natural gas heaters are identified for woodworking shops and other dusty environments. They use outside air for combustion rather than air from the heated space.

Can these heaters be converted from natural gas to propane?

Some products include an LP conversion kit or list field propane conversion. Separate kits are also available for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.

How can I compare airflow direction?

Look for adjustable louvers, three-position locking louvers, rotating discharge louvers, fan-assisted airflow, and listed heat throw. These features help compare how a model directs or projects heated air.

Helpful Buying Guide

Choose a Gas Unit Heater for Your Indoor Space

Compare gas unit heaters by heating capacity, fuel and conversion needs, venting approach, airflow direction, mounting profile, and the features suited to the environment being heated. The available products span lower-profile separated-combustion units through high-capacity gas-fired heaters for large work areas.

Visual Guide

Popular examples in this category

Use Cases

Heat workspaces of different sizes

Available heaters range from 30,000 BTU low-profile units for dusty shops to 400,000 BTU gas-fired units for high-input commercial and industrial space heating. Listed applications include factories, warehouses, garages, barns, woodworking shops, and indoor work areas.

How to Choose

Start with capacity and fuel

Match the heater’s stated BTU rating, output where provided, and listed area coverage to the intended space. Confirm whether natural gas, propane, an included LP conversion kit, field propane conversion, or a separate compatible conversion kit fits the application.

Applications

Consider the installation environment

Separated-combustion models use outside air for combustion and are identified for woodworking shops and other dusty environments. Low-profile designs support close-to-ceiling installation, while power-vented models move exhaust outdoors through a single vent pipe.

Additional Information

Compare airflow and connection details

Look for adjustable or locking louvers when directing warm air matters. Some units list heat throw, fan-assisted circulation, 120V operation, reversible connections, ceiling brackets, or flexible vertical and horizontal venting.

30,000–400,000BTU range represented

Available gas-fired heater capacities span compact to high-input space-heating applications.

Up to 6,700 sq. ft.Listed coverage

The 200,000 BTU power-vented heater is listed for spaces up to this size.

74 ft.Listed maximum heat throw

The 300,000 BTU input high-efficiency heater lists a 74-foot heat throw.

120VElectrical operation listed

Selected high-efficiency heaters specify 120-volt operation.

Comparison Guide

Compare the main product types

Use this overview to distinguish the heater and conversion-kit configurations represented in the category.

Product typeBest-fit considerationsFeatures represented
Power-vented gas unit heatersLarge factory and warehouse areas; models list coverage up to 6,700 square feet.Single-pipe exhaust venting, three-position louvers, fan-assisted airflow, and aluminized steel heat exchangers.
Low-profile separated-combustion heatersWoodworking shops and other dusty environments; close-to-ceiling applications.Outdoor combustion air, dual vents, low-profile mounting, reversible connections, and permanently lubricated motors.
High-efficiency gas-fired heaters and conversion optionsIndoor commercial or industrial work areas and compatible fuel-conversion applications.Specified input and output ratings, listed heat throw, steel construction, 120V operation, and natural gas-to-LP conversion options.
Planning Guide

Plan the right fit before choosing

Match the heater to the space

Compare heating capacity, coverage, and heat throw

BTU ratings represented in this category range from 30,000 to 400,000 BTU. Some models provide additional comparison details, including stated coverage up to 3,125, 5,000, or 6,700 square feet, usable output ratings, and heat throw measurements.

  • A 125,000 BTU unit is listed for areas up to 3,125 square feet.
  • A 150,000 BTU power-vented unit is listed for areas up to 5,000 square feet.
  • A 200,000 BTU power-vented unit is listed for areas up to 6,700 square feet.
  • High-efficiency models list 51-, 55-, or 74-foot heat throw, depending on model.
Choose venting and combustion features

Select a configuration that fits the intended environment

Power-vented heaters use a single vent pipe to move exhaust outdoors. Other models offer flexible vertical or horizontal venting with a power exhaust that can rotate 180 degrees. For dusty areas, separated-combustion heaters draw combustion air from outside the heated space and use separate vent pipes for combustion-air intake and flue-gas exhaust.

  • Power-exhaust designs include a collector box and power exhauster.
  • Safety pressure switches help assure or verify safe venting conditions.
  • Separated-combustion designs are identified for woodworking shops and other dusty environments.
  • Intermittent pilot ignition is listed with 100% shutoff and continuous retry on certain models.
Plan fuel, mounting, and air direction

Review conversion, ceiling clearance, and airflow control

Several options support natural gas-to-liquid-propane conversion, but compatibility varies by heater. Buyers can also compare low-profile mounting, included angle brackets, ceiling-mount brackets, reversible connections, louvers, and fan-assisted airflow before selecting a unit or conversion kit.

  • Separate conversion kits are listed for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.
  • One 125,000 BTU natural gas heater includes an LP conversion kit.
  • A 400,000 BTU model lists field propane conversion.
  • Low-profile models support close-to-ceiling installation and may have reversible connections.
FAQ

Common questions before buying

What types of gas unit heaters are included?

The category includes power-vented heaters, low-profile separated-combustion natural gas heaters, high-efficiency gas-fired unit heaters, and natural gas-to-LP conversion kits for stated compatible heater capacities.

Which heaters are suited to dusty environments?

The 30,000 BTU and 45,000 BTU low-profile separated-combustion natural gas heaters are identified for woodworking shops and other dusty environments. They use outside air for combustion rather than air from the heated space.

Can these heaters be converted from natural gas to propane?

Some products include an LP conversion kit or list field propane conversion. Separate kits are also available for compatible 100,000–150,000 BTU and 250,000 BTU indirect-fired unit and utility heaters.

How can I compare airflow direction?

Look for adjustable louvers, three-position locking louvers, rotating discharge louvers, fan-assisted airflow, and listed heat throw. These features help compare how a model directs or projects heated air.