Ultraviolet Air Purifiers

Ultraviolet air purifiers add UV air treatment to heating, air conditioning, and filtration setups. Common commercial uses include treating air moving through compatible HVAC ductwork, supporting coil-focused treatment, and adding overhead treatment in facilities with grid ceilings; selected options also serve home HVAC systems, mini-splits, and ceiling cassette A/C equipment.

Product Display:
Helpful Buying Guide

Choose ultraviolet air treatment for the system you maintain

The products in this category are built for different installation locations and system types. Start by identifying whether treatment is needed in ductwork, at an HVAC coil, above a grid ceiling, or inside a mini-split or ceiling cassette system. Then confirm voltage, HVAC capacity where stated, airflow or bulb configuration, and the operating approach that fits the installation.

Visual Guide

Popular examples in this category

Use Cases

Match treatment to the equipment location

Duct-mounted units treat air moving through compatible HVAC systems. Coil-focused fixtures treat illuminated coil surfaces. Recessed units provide overhead treatment without ductwork, while LED strips fit limited-space mini-split and cassette A/C applications.

How to Choose

Confirm installation and electrical requirements

Compare the intended mounting location, required voltage, and HVAC system capacity. Available options include 24V, 110V or 24V dual-voltage, 120V plug-in, and 120–277 VAC operation; some HVAC units are specified for up to 2.5 tons or from 3 to 7.5 tons.

Applications

Consider the treatment approach

Choose between UV-only treatment and units combining UV with bipolar ionization. Some products operate continuously, while an airflow-activated system runs when the connected HVAC system is operating.

Additional Info

Plan for monitoring and replacement

Several installed systems include LED status indicators and installation accessories. Stated bulb ratings include 8,000 and 9,000 hours, and a replacement UVC bulb is available for compatible UVC Max 25 units.

24VAvailable operating voltage

Used by multiple compatible HVAC and home filtration options.

Up to 2.5 tonsSpecified HVAC capacity

Available on one UV and bipolar ionization unit.

3 to 7.5 tonsSpecified HVAC range

Available on selected commercial HVAC units.

120 CFMSpecified airflow

Listed for the recessed-mount ceiling unit.

Comparison Guide

Compare the main ultraviolet air treatment formats

Use the installation location and stated system requirements to identify the most suitable product type.

Product typeWhere it is usedKey selection factors
HVAC duct-mounted purifier or treatment systemMain supply or return duct, or HVAC ductworkVoltage, stated tonnage range, airflow design, bulb configuration, and continuous or airflow-activated operation
Recessed ceiling air purifierStandard grid ceiling without ductworkTwo-tile installation area, 120 CFM airflow, concealed UV-C chamber, pre-filter, and 9,000-hour bulb
Coil fixture or LED stripHVAC coil areas, mini-splits, or ceiling cassette A/C systemsCoil exposure or limited-space fit, mounting method, power requirement, trim-to-length capability, and status or switch controls
Planning Guide

Plan the right fit before choosing

Installation options

Select a format that fits the available space

Installation styles vary across the category. Whole-house and commercial HVAC units install in supply or return ductwork, while recessed models fit the area of two tiles in a standard grid ceiling and do not connect to ductwork. Coil-cleaning fixtures and compact LED strips address different equipment locations.

  • Duct-mounted options for compatible HVAC systems
  • Recessed ceiling option with a self-contained UV-C chamber
  • Coil-focused fixtures for illuminated system-coil areas
  • Trim-to-length LED strip for mini-split and ceiling cassette A/C systems
System matching

Use capacity, voltage, and operation details to narrow choices

For HVAC-mounted purifiers, match the unit to the stated system requirements. Options include 24V models for systems up to 2.5 tons and for systems from 3 to 7.5 tons, plus high-airflow designs intended for high-SEER and commercial HVAC equipment. Power and operating details also differ by model.

  • 24V options for compatible HVAC applications
  • Dual-voltage option supporting 110V or 24V installation
  • 120V plug-in units with an included 6-foot power cord
  • Continuous-operation and airflow-activated configurations
Maintenance planning

Review lamps, indicators, and included setup items

Lamp configuration ranges from single lamps and LED strips to dual 12-inch or dual 16-inch UVC bulbs. Some units provide visual operating checks through LED indicators or status lights. Certain installed systems include templates, screws, foam tape, and illustrated directions.

  • Stated bulb life ratings of 8,000 hours and 9,000 hours on select models
  • 50,000+ hour expected LED life on the LED strip
  • Replacement bulb offered for compatible UVC Max 25 units
  • Separate power supply, cell, or lamp coverage is stated on select products
FAQ

Common questions before buying

What installation types are represented in this category?

Options include duct-mounted HVAC units, recessed grid-ceiling units, coil-focused fixtures, and LED strips for mini-split and ceiling cassette A/C systems.

Are there ultraviolet air purifiers for different HVAC sizes?

Yes. Listed options include a 24V unit for systems up to 2.5 tons and units for compatible systems from 3 to 7.5 tons.

Do all units run continuously?

No. Some models are described as continuous-operation units, while one 72W ductwork system is airflow-activated and runs when the connected HVAC system is running.

What replacement option is available?

A single replacement UVC bulb is available for compatible UVC Max 25 ultraviolet air purifiers with the stated 110V/24V dual-voltage application.

Helpful Buying Guide

Choose ultraviolet air treatment for the system you maintain

The products in this category are built for different installation locations and system types. Start by identifying whether treatment is needed in ductwork, at an HVAC coil, above a grid ceiling, or inside a mini-split or ceiling cassette system. Then confirm voltage, HVAC capacity where stated, airflow or bulb configuration, and the operating approach that fits the installation.

Visual Guide

Popular examples in this category

Use Cases

Match treatment to the equipment location

Duct-mounted units treat air moving through compatible HVAC systems. Coil-focused fixtures treat illuminated coil surfaces. Recessed units provide overhead treatment without ductwork, while LED strips fit limited-space mini-split and cassette A/C applications.

How to Choose

Confirm installation and electrical requirements

Compare the intended mounting location, required voltage, and HVAC system capacity. Available options include 24V, 110V or 24V dual-voltage, 120V plug-in, and 120–277 VAC operation; some HVAC units are specified for up to 2.5 tons or from 3 to 7.5 tons.

Applications

Consider the treatment approach

Choose between UV-only treatment and units combining UV with bipolar ionization. Some products operate continuously, while an airflow-activated system runs when the connected HVAC system is operating.

Additional Info

Plan for monitoring and replacement

Several installed systems include LED status indicators and installation accessories. Stated bulb ratings include 8,000 and 9,000 hours, and a replacement UVC bulb is available for compatible UVC Max 25 units.

24VAvailable operating voltage

Used by multiple compatible HVAC and home filtration options.

Up to 2.5 tonsSpecified HVAC capacity

Available on one UV and bipolar ionization unit.

3 to 7.5 tonsSpecified HVAC range

Available on selected commercial HVAC units.

120 CFMSpecified airflow

Listed for the recessed-mount ceiling unit.

Comparison Guide

Compare the main ultraviolet air treatment formats

Use the installation location and stated system requirements to identify the most suitable product type.

Product typeWhere it is usedKey selection factors
HVAC duct-mounted purifier or treatment systemMain supply or return duct, or HVAC ductworkVoltage, stated tonnage range, airflow design, bulb configuration, and continuous or airflow-activated operation
Recessed ceiling air purifierStandard grid ceiling without ductworkTwo-tile installation area, 120 CFM airflow, concealed UV-C chamber, pre-filter, and 9,000-hour bulb
Coil fixture or LED stripHVAC coil areas, mini-splits, or ceiling cassette A/C systemsCoil exposure or limited-space fit, mounting method, power requirement, trim-to-length capability, and status or switch controls
Planning Guide

Plan the right fit before choosing

Installation options

Select a format that fits the available space

Installation styles vary across the category. Whole-house and commercial HVAC units install in supply or return ductwork, while recessed models fit the area of two tiles in a standard grid ceiling and do not connect to ductwork. Coil-cleaning fixtures and compact LED strips address different equipment locations.

  • Duct-mounted options for compatible HVAC systems
  • Recessed ceiling option with a self-contained UV-C chamber
  • Coil-focused fixtures for illuminated system-coil areas
  • Trim-to-length LED strip for mini-split and ceiling cassette A/C systems
System matching

Use capacity, voltage, and operation details to narrow choices

For HVAC-mounted purifiers, match the unit to the stated system requirements. Options include 24V models for systems up to 2.5 tons and for systems from 3 to 7.5 tons, plus high-airflow designs intended for high-SEER and commercial HVAC equipment. Power and operating details also differ by model.

  • 24V options for compatible HVAC applications
  • Dual-voltage option supporting 110V or 24V installation
  • 120V plug-in units with an included 6-foot power cord
  • Continuous-operation and airflow-activated configurations
Maintenance planning

Review lamps, indicators, and included setup items

Lamp configuration ranges from single lamps and LED strips to dual 12-inch or dual 16-inch UVC bulbs. Some units provide visual operating checks through LED indicators or status lights. Certain installed systems include templates, screws, foam tape, and illustrated directions.

  • Stated bulb life ratings of 8,000 hours and 9,000 hours on select models
  • 50,000+ hour expected LED life on the LED strip
  • Replacement bulb offered for compatible UVC Max 25 units
  • Separate power supply, cell, or lamp coverage is stated on select products
FAQ

Common questions before buying

What installation types are represented in this category?

Options include duct-mounted HVAC units, recessed grid-ceiling units, coil-focused fixtures, and LED strips for mini-split and ceiling cassette A/C systems.

Are there ultraviolet air purifiers for different HVAC sizes?

Yes. Listed options include a 24V unit for systems up to 2.5 tons and units for compatible systems from 3 to 7.5 tons.

Do all units run continuously?

No. Some models are described as continuous-operation units, while one 72W ductwork system is airflow-activated and runs when the connected HVAC system is running.

What replacement option is available?

A single replacement UVC bulb is available for compatible UVC Max 25 ultraviolet air purifiers with the stated 110V/24V dual-voltage application.