Inline Fans

Inline fans in this category are belt-drive tube axial duct fans for moving air through duct-connected commercial and industrial ventilation systems. Common uses include paint booth exhaust, air make-up, general exhaust, and general ventilation, with represented options for clean, dry air and moisture-laden air applications.

Product Display:
Helpful Buying Guide

Inline Fan Buying Guide

Compare ducted airflow needs, available electrical configuration, air conditions, and the features that support installation and bearing lubrication. The represented tube axial fans range from smaller ducted ventilation options to high-volume models for exhaust and air make-up systems.

Visual Guide

Popular examples in this category

Use Cases

Match the fan to the ventilation duty

These inline fans are represented for paint booth exhaust, air make-up, general exhaust, and general ventilation through connected ductwork.

How to Choose

Start with airflow and power

Compare the required CFM, fan size, horsepower, and whether the installation uses single-phase or three-phase power.

Applications

Consider the air being moved

Some represented models are intended for clean, dry air, while others support moisture-laden air applications. Listed temperature suitability reaches up to 375°F for certain clean, dry air models and up to 200°F for certain moisture-laden air models.

Additional Info

Review service-access features

Adjustable motor bases allow motor positioning adjustments. Many represented models also include external grease fittings and extended lube lines for bearing lubrication access.

4,110–38,300CFM range

Listed airflow across represented models.

18–48 in.Fan diameters

Represented tube axial fan sizes.

1/2–10 HPMotor range

Listed horsepower across the summaries.

1 or 3Electrical phases

Single-phase and three-phase examples are represented.

Comparison Guide

Compare represented inline fan configurations

Use this overview to narrow choices by ducted airflow level, power configuration, and the stated air-application details.

ConfigurationRepresentative optionsWhat to compare
Lower-airflow ducted options18 in., 1/2 HP, 4,110 CFM; 24 in., 3/4 HP, 6,750 CFMConfirm required CFM, single-phase power, blade construction, and whether clean, dry or moisture-laden air is stated.
Mid-range ducted options24 in., 3 HP three-phase, 10,800 CFM; 30 in., 1 HP, 10,800 CFM; 34 in., 1-1/2 HP, 15,100 CFM; 36 in., 2 HP, 17,820 CFMCompare phase, horsepower, airflow, air conditions, and service-access features.
High-volume ducted options30 in., 5 HP three-phase, 18,410 CFM; 34 in., 7-1/2 HP three-phase, 25,700 CFM; 48 in. options up to 38,300 CFMVerify the listed CFM, electrical configuration, blade material, and clean, dry or moisture-laden air suitability.
Planning Guide

Plan the right fit before choosing

Plan airflow and configuration

Choose a ducted fan around the system requirement

The represented fans provide airflow from 4,110 to 38,300 CFM. Match the fan's listed airflow to the duct-connected exhaust, air make-up, or ventilation requirement, then confirm the fan diameter, horsepower, and electrical phase for the installation.

  • Airflow shown ranges from 4,110 to 38,300 CFM.
  • Represented diameters include 18, 24, 30, 34, 36, and 48 inches.
  • Available examples include single-phase and three-phase belt-drive configurations.
  • Listed horsepower ranges from 1/2 HP to 10 HP.
Evaluate air conditions

Select for clean, dry or moisture-laden air

Air conditions vary among the represented models. Certain fans are described for clean, dry air applications, including models with stated suitability up to 375°F. Other models are described for moisture-laden air, with stated suitability up to 200°F on certain configurations.

  • Use clean, dry air information where that is the stated application.
  • Review moisture-laden air suitability when applicable.
  • Check the listed temperature capability for the individual model.
  • Do not treat all represented configurations as having the same air-condition suitability.
Review construction and maintenance access

Compare blades, motor adjustment, and lubrication access

Blade construction differs by model: represented fans use cast aluminum blades or polypropylene-reinforced fiberglass blades. Adjustable motor bases are included across the summaries, while external grease fittings and extended lube lines provide bearing lubrication access on many models.

  • Cast aluminum blades are represented on several 18- through 36-inch models.
  • Reinforced fiberglass blades are represented on 48-inch models.
  • Adjustable motor bases support motor positioning adjustments.
  • Some models use pillow block ball bearings with high-temperature grease.
FAQ

Common questions before buying

What are these inline fans used for?

They are represented for duct-connected paint booth exhaust, air make-up, general exhaust, and general ventilation.

What airflow options are represented?

Listed airflow ranges from 4,110 CFM to 38,300 CFM, depending on the model.

Are both single-phase and three-phase fans available?

Yes. The summaries include both single-phase and three-phase belt-drive tube axial fan configurations.

How do clean, dry air and moisture-laden air applications differ?

Some models are described for clean, dry air, while others support moisture-laden air. Review each model's stated application and temperature suitability.