Floor & Bench Shears

Floor & bench shears are used to make straight, controlled cuts in sheet metal for metalworking shops, fabrication work, school metalworking areas, and other shop environments. The represented models cut mild steel across a 52-inch span and use foot-pedal, hydraulic, or compressed-air operation to support material positioning and repeatable cutting setups.

Product Display:
Helpful Buying Guide

Choose a floor or bench shear for your sheet-cutting setup

Compare the material capacity, operating method, and positioning features that fit the way your shop handles sheet stock. The products represented here share a 52-inch cutting width or working length, while their stated mild steel capacities and operating controls vary.

Visual Guide

Popular examples in this category

Use Cases

Straight cuts in sheet stock

These shears are designed for straight, controlled cuts in mild steel sheet. They are represented for small to midsize shops, metalworking teams, fabricators, schools, and shop environments.

How to Choose

Start with capacity and operation

Match the stated mild steel capacity to your work: selected models are rated for 16 gauge, while the hydraulic model covers a stated 24-gauge to 10-gauge range. Then choose foot-pedal, hydraulic, or compressed-air operation.

Applications

Support measured, repeatable cuts

Backstops, backgauges, squaring stops, and front material supports help position sheet material for repeatable cut lengths and alignment during shop cutting operations.

Additional Info

Review blade and maintenance features

Blade options include four-sided resharpenable blades, rotatable four-edge blades, and multi-edge carbon blades. One foot-operated model also includes built-in oilers, while hydraulic hold-downs clamp material to the table.

52 in.Cutting span

Each represented model has a 52-inch cutting length, width, or working length.

10 ga.Hydraulic capacity

The hydraulic model has a stated mild steel capacity through 10 gauge.

16 ga.Foot and pneumatic capacity

The foot-operated and pneumatic models are represented with 16-gauge mild steel capacity.

3 modesHydraulic control

The hydraulic model provides inch, single-cycle, and continuous cycling options.

Comparison Guide

Compare represented shear types

Use this overview to compare the operating method, stated mild steel capacity, and notable setup features described for each type.

Shear typeStated capacity and operationPositioning and blade features
Foot-operated52-inch cut length; 16-gauge mild steel capacity; pedal operationFront material supports and backstop or gauges; four-sided rotatable, resharpenable blades
Hydraulic52-inch working length; stated 24-gauge to 10-gauge mild steel range; inch, single-cycle, and continuous modesAdjustable 24-inch backgauge; hydraulic hold-downs; four-edge blades
Pneumatic52-inch cutting width; 16-gauge mild steel capacity; compressed air at 90 to 115 psiBackgauge and squaring stops; adjustable airflow regulator; multi-edge carbon blades
Planning Guide

Plan the right fit before choosing

Plan for the material

Compare stated mild steel capacity

Capacity is a primary selection point when choosing among these 52-inch shears.

  • Foot-operated and pneumatic models are represented with 16-gauge mild steel capacity.
  • The hydraulic model is represented with a stated mild steel range from 24 gauge to 10 gauge.
  • Use the product’s stated capacity when comparing models for your sheet-metal work.
Plan for operation

Select the power method that suits the workspace

The available operating methods differ in how the shear is actuated and what shop input is described.

  • Foot-operated models are actuated with a pedal, keeping the operator’s hands available for material positioning.
  • The hydraulic model offers inch, single-cycle, and continuous cycling modes.
  • The pneumatic model operates on compressed air at 90 to 115 psi and does not require electrical power.
Plan for repeat cuts

Look for positioning and material-control features

Features that help set material position can be useful when making repeated cuts.

  • An integrated backstop or adjustable backgauge helps establish repeatable material positions.
  • Front material supports help keep sheet aligned with the blade.
  • Front and back gauges, squaring stops, and hydraulic hold-downs provide additional support or control on the models where listed.
FAQ

Common questions before buying

What materials are these shears described for?

The represented products are described for cutting mild steel sheet metal within their stated capacities. The pneumatic model is also described for lighter material.

What is the cutting length of the represented models?

Each represented model has a 52-inch cutting length, cutting width, or working length.

What operating methods are available?

The represented types use foot-pedal operation, hydraulic operation, or compressed-air operation.

Which features help with repeat cuts?

Depending on the model, an integrated backstop, adjustable backgauge, front and back gauges, or squaring stops help support repeatable cutting setups.