This natural gas infrared straight tube heater is a commercial and industrial heating system for facility operators who need radiant heat in larger work areas. Its 40-foot straight configuration delivers heat for spaces where a gas-fired infrared tube system is appropriate.
The 75,000 BTU heater uses natural gas and a power-vented, positive-pressure configuration with a 3.5-inch outside-diameter emitter tube. The system measures 13.5 inches wide by 492.75 inches deep by 10.5 inches high and has a white finish. Included components are a powder-coated aluminized steel burner, bright-finish aluminum reflectors, heat-treated aluminized steel radiant tubes, tube and reflector hangers, intermediate supports, joint sealer, screws, a turbulator, a stainless steel flexible gas connector with manual gas valve, and two reflector end caps.
Key Features:
- 40-foot straight tube: Provides a long, straight radiant-heating layout for compatible commercial and industrial installations.
- Natural gas operation: Supports facilities set up to use natural gas for their heating equipment.
- Power-vented design: Uses a positive-pressure, push-through system configuration.
- Included installation components: Supplies key burner, reflector, tube, support, connector, and end-cap components as part of the system package.
- CSA certified: Provides certification identified for this heater.
Choose this 75,000 BTU natural gas infrared tube heater when a 40-foot straight, power-vented radiant system fits the heating layout. Installation must follow applicable local codes and be completed by a qualified HVAC contractor experienced with gas-fired heating equipment.
| Color/Finish: |
White |
| Country of Origin: |
US |
| Material: |
Aluminized Steel/Aluminum |
| Product Depth: |
13.5 |
| Product Height: |
10.5 |
| Product Type: |
Gas Infrared Heaters |
| Product Width: |
492.75 |
| Quantity Included: |
1 |
| Warranty: |
3 Year Burner/10 Year Tube |
| Color: |
White |
| Length: |
41-1/16 in |
| Weight: |
121 lbs |
| Burner Pressure: |
3-1/2 in |
| Clearance to Combustibles Bottom: |
50 in |
| Clearance to Combustibles Side: |
24 in |
| Clearance to Combustibles Top: |
5 in |
| Duct Size: |
4 in |
| Gas Inlet Pressure Max Water Column: |
14 in |
| Max Mounting Height: |
20 ft |
| Min Mounting Height: |
12 ft |
| Tube Length: |
40 ft |
| Amperage: |
1.4 A |
| BTU: |
75000 BTU |
| Fuel Type: |
Natural Gas |
| Ignition Type: |
Direct Spark |
| Includes: |
NPT Stainless Steel Gas Flex |
| Mounting Location: |
Ceiling |
| Phase: |
1 |
| Power Cord Type: |
Hard Wired |
| Shape: |
Straight |
| Tube Material: |
Aluminized Steel |
| Type: |
Positive Pressure Tube |
| Voltage: |
110 V |
| Wattage: |
21980 W |
| Watts High: |
21980 W |
| Certifications: |
CSA |
| Shipping Method: |
LTL |
| Width: |
13.50
in
|
| Height: |
10.50
in
|
| Depth: |
492.75
in
|
No additional information available.