This 75,000 BTU straight-tube gas infrared heater is designed for commercial and industrial facilities that need radiant heat from a tube-based system. Its 20-foot straight configuration supports heating setups in warehouse, service, and other commercial work environments.
The power-vented heater has a 20-foot straight tube configuration and a 3.5-inch outside-diameter emitter tube. The package includes a powder-coated aluminized steel burner, bright-finish aluminum reflectors, heat-treated aluminized steel radiant tubes, tube and reflector hangers, intermediate supports, joint sealer, screws, a turbulator, a stainless steel flexible gas connector with manual gas valve, and two reflector end caps. Overall dimensions are 257.25 inches long by 13.5 inches wide by 10.5 inches high.
Key Features:
- 75,000 BTU output: Provides a specified heating capacity for commercial and industrial heating layouts.
- 20-foot straight tube: Offers a straight configuration for planned overhead heater installations.
- Power-vented design: Uses a positive-pressure, push-through system configuration.
- Included installation components: Supplies reflectors, hangers, supports, sealing materials, and end caps as part of the system package.
- Aluminized steel radiant tubes: Provides the radiant tube components required for the heater system.
Choose this straight-tube infrared heater when a 75,000 BTU, 20-foot power-vented system fits the requirements of your commercial or industrial facility. Installation must be completed by a qualified HVAC contractor in accordance with applicable codes and regulations.
| Color/Finish: |
White |
| Country of Origin: |
US |
| Material: |
Aluminized Steel/Aluminum |
| Product Depth: |
13.5 |
| Product Height: |
10.5 |
| Product Type: |
Gas Infrared Heaters |
| Product Width: |
257.25 |
| Quantity Included: |
1 |
| Warranty: |
3 Year Burner/10 Year Tube |
| Color: |
White |
| Length: |
21-7/16 in |
| Weight: |
83 lbs |
| Burner Pressure: |
10 in |
| Clearance to Combustibles Bottom: |
50 in |
| Clearance to Combustibles Side: |
24 in |
| Clearance to Combustibles Top: |
5 in |
| Duct Size: |
4 in |
| Gas Inlet Pressure Max Water Column: |
14 in |
| Max Mounting Height: |
20 ft |
| Min Mounting Height: |
12 ft |
| Tube Length: |
20 ft |
| Amperage: |
1.4 A |
| BTU: |
75000 BTU |
| Fuel Type: |
Propane |
| Ignition Type: |
Direct Spark |
| Includes: |
NPT Stainless Steel Gas Flex |
| Mounting Location: |
Ceiling |
| Phase: |
1 |
| Power Cord Type: |
Hard Wired |
| Shape: |
Straight |
| Tube Material: |
Aluminized Steel |
| Type: |
Positive Pressure Tube |
| Voltage: |
110 V |
| Wattage: |
21980 W |
| Watts High: |
21980 W |
| Certifications: |
CSA |
| Shipping Method: |
LTL |
| Width: |
13.50
in
|
| Height: |
10.50
in
|
| Depth: |
257.25
in
|
No additional information available.