This natural gas infrared tube heater is designed for commercial and industrial facilities that need radiant heat. Facility operators and qualified HVAC contractors can use it to support heating in work and storage environments.
The 40,000 BTU power-vented heater uses natural gas and has a 10-foot U-configuration tube system with a 3.5-inch outside-diameter emitter tube. Overall dimensions are 13.5 inches wide, 141 inches deep, and 10.5 inches high. The package includes a powder-coated aluminized steel burner, bright-finish aluminum reflectors, heat-treated aluminized steel radiant tubes, tube and reflector hangers, intermediate supports, joint sealer, screws, a turbulator, two reflector end caps, and a stainless steel flexible gas connector with manual gas valve.
Key Features:
- Natural Gas Operation: Provides a gas-fired radiant heating option for compatible commercial and industrial installations.
- Power-Vented Design: Uses a positive-pressure, push-through system configuration.
- 10-Foot Tube System: Supplies a 10-foot U-configuration radiant tube assembly.
- Included Mounting Components: Includes hangers and intermediate supports for the tube and reflector system.
- Reflector Assembly: Includes bright-finish aluminum reflectors and two reflector end caps.
- Component Coverage: Includes a limited warranty of three years on ignition controls and electrical components and 10 years on radiant tubes; see the owner's manual for details.
Choose this natural gas infrared tube heater when a 40,000 BTU, power-vented radiant system with a 10-foot tube configuration fits the installation requirements. Installation must follow applicable local codes and be performed by a qualified HVAC contractor experienced with gas-fired heating equipment.
| Color/Finish: |
White |
| Country of Origin: |
US |
| Material: |
Aluminized Steel/Aluminum |
| Product Depth: |
13.5 |
| Product Height: |
10.5 |
| Product Type: |
Gas Infrared Heaters |
| Product Width: |
141 |
| Quantity Included: |
1 |
| Warranty: |
3 Year Burner/10 Year Tube |
| Color: |
White |
| Length: |
11-3/4 in |
| Weight: |
58 lbs |
| Burner Pressure: |
3-1/2 in |
| Clearance to Combustibles Bottom: |
44 in |
| Clearance to Combustibles Side: |
12 in |
| Clearance to Combustibles Top: |
5 in |
| Duct Size: |
4 in |
| Gas Inlet Pressure Max Water Column: |
14 in |
| Max Mounting Height: |
11 ft |
| Min Mounting Height: |
8 ft |
| Tube Length: |
10 ft |
| Amperage: |
1.4 A |
| BTU: |
40000 BTU |
| Fuel Type: |
Natural Gas |
| Ignition Type: |
Direct Spark |
| Includes: |
NPT Stainless Steel Gas Flex |
| Mounting Location: |
Ceiling |
| Phase: |
1 |
| Power Cord Type: |
Hard Wired |
| Shape: |
Straight |
| Tube Material: |
Aluminized Steel |
| Type: |
Positive Pressure Tube |
| Voltage: |
110 V |
| Wattage: |
11723 W |
| Watts High: |
11723 W |
| Certifications: |
CSA |
| Shipping Method: |
LTL |
| Width: |
13.50
in
|
| Height: |
10.50
in
|
| Depth: |
141.00
in
|
No additional information available.