This natural gas infrared straight tube heater is designed for commercial and industrial facility operators who need radiant heat for larger work and storage areas. Its 20-foot straight-tube configuration provides a gas-fired heating solution for spaces such as warehouses, service garages, and shipping areas.
The pre-engineered, power-vented system delivers 50,000 BTU and uses a 20-foot straight radiant tube with a 3.5-inch outside diameter. It includes a powder-coated aluminized steel burner, heat-treated aluminized steel radiant tubes, bright-finish aluminum reflectors, tube and reflector hangers, intermediate supports, joint sealer, screws, a turbulator, two reflector end caps, and a stainless steel flexible gas connector with manual gas valve for US installations.
Key Features:
- 50,000 BTU output: Provides substantial gas-fired radiant heating capacity for commercial and industrial areas.
- 20-foot straight tube: Offers a straightforward configuration for installations requiring a long, linear radiant heater.
- Power-vented operation: Uses a positive-pressure, push-through venting system as part of the pre-engineered heater package.
- Included mounting and support components: Supplies tube and reflector hangers plus intermediate supports for the system installation.
- Natural gas fuel: Designed to operate on natural gas.
- CSA certified: Provides a certified product option for specified heating equipment requirements.
This 50,000 BTU natural gas tube heater is suited to commercial and industrial radiant-heating installations that need a 20-foot straight configuration. Installation must be completed by a qualified HVAC contractor in accordance with applicable local codes, laws, and regulations.
| Color/Finish: |
White |
| Country of Origin: |
US |
| Material: |
Aluminized Steel/Aluminum |
| Product Depth: |
13.5 |
| Product Height: |
10.5 |
| Product Type: |
Gas Infrared Heaters |
| Product Width: |
257.25 |
| Quantity Included: |
1 |
| Warranty: |
3 Year Burner/10 Year Tube |
| Color: |
White |
| Length: |
21-7/16 in |
| Weight: |
83 lbs |
| Burner Pressure: |
3-1/2 in |
| Clearance to Combustibles Bottom: |
44 in |
| Clearance to Combustibles Side: |
12 in |
| Clearance to Combustibles Top: |
5 in |
| Duct Size: |
4 in |
| Gas Inlet Pressure Max Water Column: |
14 in |
| Max Mounting Height: |
16 ft |
| Min Mounting Height: |
10 ft |
| Tube Length: |
20 ft |
| Amperage: |
1.4 A |
| BTU: |
50000 BTU |
| Fuel Type: |
Natural Gas |
| Ignition Type: |
Direct Spark |
| Includes: |
NPT Stainless Steel Gas Flex |
| Mounting Location: |
Ceiling |
| Phase: |
1 |
| Power Cord Type: |
Hard Wired |
| Shape: |
Straight |
| Tube Material: |
Aluminized Steel |
| Type: |
Positive Pressure Tube |
| Voltage: |
110 V |
| Wattage: |
14654 W |
| Watts High: |
14654 W |
| Certifications: |
CSA |
| Shipping Method: |
LTL |
| Width: |
13.50
in
|
| Height: |
10.50
in
|
| Depth: |
257.25
in
|
No additional information available.