This wall-mounted exhaust fan is designed for facility teams that need low-pressure air exhausting and cooling. Its direct-drive operation and wall-mount design support ventilation in indoor commercial spaces.
The fan has a 30-inch diameter, delivers 8,000 CFM, and operates at one speed of 1,100 RPM. It uses a 1/4 HP totally enclosed motor on 120 V single-phase power, with a hardwire connection. Three aluminum blades are enclosed by steel spiral wire guards, and built-in mounting holes allow direct wall installation. Overall length and width are 32-1/4 inches.
Key Features:
- 8,000 CFM Airflow: Provides substantial air movement for low-pressure exhaust and cooling needs.
- Direct-Drive Motor: Delivers single-speed operation at 1,100 RPM.
- Guarded Aluminum Blades: Steel spiral wire guards surround the three aluminum blades for added protection.
- Wall-Mount Design: Built-in mounting holes support direct attachment to a wall.
- Effective Minimum Order: Minimum order is 1.
Choose this indoor wall exhaust fan for direct-drive ventilation where 8,000 CFM airflow, a 30-inch fan diameter, and hardwired single-speed operation fit the installation requirements.
| Length: |
32-1/4 in |
| Product Width: |
32.25 |
| Cord Length: |
Not Included ft |
| Fan Diameter: |
30 in |
| Amperage: |
2.90 A |
| Assembly Required: |
No |
| CFM: |
8000 CFM |
| Decibels: |
76 |
| Drive Type: |
Direct Drive |
| Horsepower: |
1/4 HP |
| Housing Material: |
Steel |
| Indoor/Outdoor: |
Indoor |
| Material: |
Aluminum |
| Max Temperature: |
104 °F |
| Motor Type: |
Totally Enclosed |
| Mounting Location: |
Wall |
| Number of Speeds: |
1 |
| Phase: |
1 |
| Power Cord Type: |
Hard Wire |
| RPM: |
1100 rpm |
| Voltage: |
120 V |
| Wattage: |
275 W |
| Certifications: |
UL, cUL listed, OSHA, UL507 |
| Shipping Method: |
LTL |
| Width: |
34.50
in
|
| Height: |
11.50
in
|
| Depth: |
34.00
in
|
No additional information available.