This gas-fired infrared straight tube heater is designed for commercial and industrial facilities that need radiant heat coverage. Its 40-foot straight configuration provides a heating solution for qualified HVAC contractors installing gas-fired equipment in accordance with applicable local requirements.
The 125,000 BTU power-vented system uses a 4-inch OD emitter tube in a 40-foot straight configuration. The package includes a powder-coated aluminized steel burner, bright-finish aluminum reflectors, heat-treated aluminized steel radiant tubes, tube and reflector hangers, intermediate supports, joint sealer, screws, a turbulator, a stainless steel flexible gas connector with manual gas valve, and two reflector end caps. Overall dimensions are 13.5 in. W x 492.75 in. D x 10.5 in. H.
Key Features:
- Power-vented operation: Supports a positive-pressure, push-through gas-fired heating system design.
- 40-foot straight tube: Provides a long straight radiant tube configuration for the installation layout.
- Complete component package: Includes burner, reflectors, tubes, hangers, supports, connector, valve, and other listed installation components.
- Aluminum reflectors: Bright-finish reflectors are included as standard components of the system.
- Limited warranty coverage: Includes a limited 3-year warranty on ignition controls and electrical components and a 10-year warranty on radiant tubes; see the owner's manual for details.
Choose this 125,000 BTU, 40-foot gas infrared tube heater for commercial or industrial radiant-heating installations requiring a straight, power-vented system. Installation must be performed by a qualified HVAC contractor in accordance with local codes, laws, and regulations.
| Color/Finish: |
White |
| Country of Origin: |
US |
| Material: |
Aluminized Steel/Aluminum |
| Product Depth: |
13.5 |
| Product Height: |
10.5 |
| Product Type: |
Gas Infrared Heaters |
| Product Width: |
492.75 |
| Quantity Included: |
1 |
| Warranty: |
3 Year Burner/10 Year Tube |
| Color: |
White |
| Length: |
41-1/16 in |
| Weight: |
131 lbs |
| Burner Pressure: |
10 in |
| Clearance to Combustibles Bottom: |
65 in |
| Clearance to Combustibles Side: |
32 in |
| Clearance to Combustibles Top: |
6 in |
| Duct Size: |
4 in |
| Gas Inlet Pressure Max Water Column: |
14 in |
| Max Mounting Height: |
20 ft |
| Min Mounting Height: |
12 ft |
| Tube Length: |
40 ft |
| Amperage: |
1.4 A |
| BTU: |
125000 BTU |
| Fuel Type: |
Propane |
| Ignition Type: |
Direct Spark |
| Includes: |
NPT Stainless Steel Gas Flex |
| Mounting Location: |
Ceiling |
| Phase: |
1 |
| Power Cord Type: |
Hard Wired |
| Shape: |
Straight |
| Tube Material: |
Aluminized Steel |
| Type: |
Positive Pressure Tube |
| Voltage: |
110 V |
| Wattage: |
36634 W |
| Watts High: |
36634 W |
| Certifications: |
CSA |
| Shipping Method: |
LTL |
| Width: |
13.50
in
|
| Height: |
10.50
in
|
| Depth: |
492.75
in
|
No additional information available.