Carbide

Silicon carbide abrasive belts are belt-format sanding abrasives for commercial shops, maintenance work, and general surface-sanding tasks. Available in multiple grit levels and dimensions, these cloth-backed belts are used on compatible sanding equipment for work on wood, glass, stone, and other applicable surfaces, including material removal, surface preparation, sanding, and controlled finishing.

Product Display:
Helpful Buying Guide

Choose Silicon Carbide Belts for Your Sanding Equipment and Task

Selecting an abrasive belt starts with the exact belt size required by the equipment, then the grit level suited to the sanding task. The products represented here use sharp silicon carbide grain and cloth backing, with options for material removal, surface preparation, general sanding, and finer finishing work.

Visual Guide

Popular examples in this category

Silicon Carbide Abrasive Belt, 37 in. x 60 in., 80 GritSilicon Carbide Abrasive Belt, 37 in. x 60 in., 80 GritWBM2111019Silicon Carbide Sanding Belt, 2 in. x 72 in., 400 GritSilicon Carbide Sanding Belt, 2 in. x 72 in., 400 GritWBM2111323Silicon Carbide Abrasive Belt, 6 in. x 48 in., 24 GritSilicon Carbide Abrasive Belt, 6 in. x 48 in., 24 GritWBM2110620Silicon Carbide Abrasive Belt, 25 in. x 48 in., 100 GritSilicon Carbide Abrasive Belt, 25 in. x 48 in., 100 GritWBM2111567
Use Cases

Support sanding from preparation through finishing

Available grit options cover material removal and surface preparation at 40 and 60 grit, general sanding choices such as 80 and 100 grit, and controlled or fine finishing options at 180, 220, and 400 grit.

How to Choose

Match belt dimensions before choosing grit

Confirm the sanding equipment accepts the belt width and length needed. Represented sizes include 1/2 in. x 18 in., 1-1/2 in. x 24 in., 2 in. x 72 in., 6 in. x 48 in., 4 in. x 106 in., 25 in. x 48 in., and 37 in. x 60 in.

Applications

Use on applicable workpiece materials

These silicon carbide belts are described for sanding wood, glass, stone, and other applicable surfaces on compatible belt sanding equipment.

Additional Information

Consider pack quantity for replacement needs

Some selections are supplied as individual belts, while represented package quantities also include two-belt and 10-belt options for replenishment and ongoing work.

24–400Grit range represented

Options span from 24-grit through 400-grit abrasive surfaces.

7Belt sizes represented

Sizes range from 1/2 in. x 18 in. to 37 in. x 60 in.

2 & 10Multi-belt pack quantities

Selected products are offered in two-belt or 10-belt packages.

3Named workpiece materials

Products are described for wood, glass, and stone.

Comparison Guide

Compare Silicon Carbide Abrasive Belt Options

Use the equipment-required size first, then compare the listed grit options and package quantities for the sanding task.

Selection focusRepresented choicesWhat to consider
Material removal and preparation24, 40, 60, and 80 grit optionsChoose the belt size required by compatible equipment; 40 and 60 grit are described for material removal, while 60 grit is also described for surface preparation.
General sanding80, 100, and 120 grit optionsCompare the specified grit with the work at hand and select dimensions that match the equipment.
Finishing and fine sanding180, 220, and 400 grit options180 grit supports controlled finishing, while 220 and 400 grit are described as fine abrasive options.
Planning Guide

Plan the right fit before choosing

Start With Equipment Fit

Choose the belt size your machine requires

Belt size is an essential selection point because each option is intended for equipment that accepts its stated dimensions. Check both width and length before comparing abrasive grit.

  • Narrow options include 1/2 in. x 18 in. and 1-1/2 in. x 24 in.
  • Other represented sizes include 2 in. x 72 in. and 4 in. x 106 in.
  • For wider formats, choices include 6 in. x 48 in., 25 in. x 48 in., and 37 in. x 60 in.
Select the Grit for the Work

Compare abrasive options by sanding objective

The represented belts range from 24 to 400 grit. Lower listed grits are represented for sanding and material-removal work, while 60 grit is specifically described for material removal and surface preparation. Finer listed grits include 180 for controlled finishing, 220 for fine sanding, and 400 for fine sanding tasks.

  • 24, 40, and 60 grit: specified options for sanding and material removal or preparation tasks.
  • 80, 100, and 120 grit: defined grit choices for a range of sanding work.
  • 180, 220, and 400 grit: options for finishing or fine sanding applications.
Review Belt Construction and Quantity

Choose cloth-backed belts in the quantity that fits the work

Every represented product combines silicon carbide grain with cloth backing. The sharp grain supports sanding on wood, glass, stone, and other applicable surfaces, while cloth backing supports dependable or reliable belt performance during use. Package quantities vary by selection.

  • Silicon carbide grain provides a sharp abrasive surface.
  • Cloth backing supports belt performance during sanding.
  • Two-belt and 10-belt packages are available among the represented options.
FAQ

Common questions before buying

What materials are these silicon carbide abrasive belts used on?

The represented belts are described for sanding wood, glass, stone, and other applicable surfaces.

What grit options are represented?

Represented grit options include 24, 40, 60, 80, 100, 120, 180, 220, and 400 grit.

How do I choose the right belt size?

Match the stated belt width and length to sanding equipment designed to accept that exact belt size.

Are multi-belt packages available?

Yes. Represented selections include two-belt packages and 10-belt packages, while other options are listed without a multi-belt quantity.

!