HVAC Controls, Parts & Service

HVAC controls, parts, and service accessories support managed temperature-control setups in commercial and facility environments. This category includes clear and metal thermostat guards for enclosing visible room controls, including keyed, hinged, universal, and mounting-plate options; an outdoor or supply temperature sensor for compatible controls; and a field-installed thermostat kit for compatible horizontal or downflow unit heaters. When selecting, confirm thermostat or control compatibility, required opening or base dimensions, mounting components, cover material and visibility, key access, and the temperature range or equipment application needed.

Aquastats
Aquastats
Bearings
Bearings
Capacitors
Capacitors
Circulator Pump Accessories
Circulator Pump Accessories
Circulator Pumps
Circulator Pumps
Compressors
Compressors
Condensate Pumps
Condensate Pumps
HVAC Cleaning Equipment
HVAC Cleaning Equipment
HVAC Installation & Maintenance Tools
HVAC Installation & Maintenance Tools
Installation Accessories
Installation Accessories
Leak Detectors & Test Instruments
Leak Detectors & Test Instruments
Manifolds & Gauges
Manifolds & Gauges
Motor Mounting Parts
Motor Mounting Parts
Pressure Controls & Switches
Pressure Controls & Switches
Thermostat Accessories
Thermostat Accessories
Thermostat Limit Switches
Thermostat Limit Switches
Water Flow Valves & Switches
Water Flow Valves & Switches
Aquastats
Aquastats
Bearings
Bearings
Capacitors
Capacitors
Circulator Pump Accessories
Circulator Pump Accessories
Circulator Pumps
Circulator Pumps
Compressors
Compressors
Condensate Pumps
Condensate Pumps
HVAC Cleaning Equipment
HVAC Cleaning Equipment
HVAC Installation & Maintenance Tools
HVAC Installation & Maintenance Tools
Installation Accessories
Installation Accessories
Leak Detectors & Test Instruments
Leak Detectors & Test Instruments
Manifolds & Gauges
Manifolds & Gauges
Motor Mounting Parts
Motor Mounting Parts
Pressure Controls & Switches
Pressure Controls & Switches
Thermostat Accessories
Thermostat Accessories
Thermostat Limit Switches
Thermostat Limit Switches
Water Flow Valves & Switches
Water Flow Valves & Switches
Product Display:
Choose Your Starting Point

HVAC Controls, Parts & Service: Everything You Need to Keep Your System Running

Whether you're replacing a worn component, upgrading system controls, or performing routine maintenance, this category covers the essential parts and equipment that keep heating and cooling systems operating efficiently. Use the subcategory paths below to find exactly what your job requires.

Related Categories

Choose your starting point

AquastatsALL CATEGORIES > CLIMATE CONTROL & AIR QUALITY > HVAC Controls, Parts & Service > AquastatsBearingsALL CATEGORIES > CLIMATE CONTROL & AIR QUALITY > HVAC Controls, Parts & Service > BearingsCapacitorsALL CATEGORIES > CLIMATE CONTROL & AIR QUALITY > HVAC Controls, Parts & Service > CapacitorsCirculator Pump AccessoriesALL CATEGORIES > CLIMATE CONTROL & AIR QUALITY > HVAC Controls, Parts & Service > Circulator Pump AccessoriesCirculator PumpsALL CATEGORIES > CLIMATE CONTROL & AIR QUALITY > HVAC Controls, Parts & Service > Circulator PumpsCompressorsALL CATEGORIES > CLIMATE CONTROL & AIR QUALITY > HVAC Controls, Parts & Service > Compressors
Visual Guide

Popular examples in this category

High-Limit Oil Aquastat Relay, 120VHigh-Limit Oil Aquastat Relay, 120VWBB394547Bluetooth Circulator Pump Communication ModuleBluetooth Circulator Pump Communication ModuleWBB1529849Industrial Plug-In Temperature Controller with Power Cord, 40° to 110°FIndustrial Plug-In Temperature Controller with Power Cord, 40° to 110°FWBB970415Clear Plastic Thermostat GuardClear Plastic Thermostat GuardWBB860061
What These Products Are For

Keeping HVAC Systems Operational and Efficient

These products support repair, maintenance, and replacement tasks across residential and commercial HVAC systems. From failed capacitors to worn pump bearings, having the right part on hand reduces downtime, restores comfort, and extends the working life of heating and cooling equipment.

How To Choose

Start With the System and the Problem

Identify the system type (hydronic, forced air, refrigeration), the failing or worn component, and the specifications required—voltage, flow rate, pressure rating, or physical dimensions. Matching specs precisely prevents compatibility issues and callbacks on completed jobs.

Common Applications

Where These Parts and Controls Are Used

Common applications include boiler and hydronic heating systems, split and packaged air conditioning units, commercial refrigeration, and ventilation systems. Parts like circulator pumps, capacitors, and aquastats are used in both new installations and service replacement scenarios.

Additional Information

Sourcing Tips and Service Considerations

Always verify OEM specifications or cross-reference part numbers before ordering. For service work, stocking common failure items—capacitors, condensate pumps, and bearings—reduces truck rolls and speeds up repairs. Cleaning equipment supports preventive maintenance programs that lower long-term service costs.

Comparison Guide

Which Subcategory Do You Need? A Quick Reference

Match your service need to the right subcategory path using this guide.

NeedBest Fit SubcategoryWhy It Matters
Control boiler water temperatureAquastatsAquastats regulate when the boiler fires based on water temperature setpoints, protecting the system and maintaining efficiency
Replace a failed motor or pump componentBearings or Circulator Pump AccessoriesBearings and accessories allow targeted repair without full pump replacement, saving cost and labor time
Restore circulation in a hydronic systemCirculator PumpsThe right pump must match system flow rate and head pressure to maintain proper heat distribution
Fix a non-starting AC or refrigeration unitCapacitors or CompressorsCapacitors are a common low-cost fix; if the compressor itself has failed, replacement is required
Remove standing water from drain pansCondensate PumpsCondensate pumps prevent water damage and mold by actively removing condensate when gravity drainage isn't available
Perform seasonal system cleaningHVAC Cleaning EquipmentRegular coil and drain cleaning maintains airflow, efficiency, and indoor air quality across all system types
Planning Guide

Plan the right fit before choosing

Planning Guide

Step 1: Identify the System and Failure Point

Before selecting any part or control, confirm the system type and the specific component that needs attention. Hydronic systems rely heavily on circulator pumps, aquastats, and bearings, while refrigerant-based systems commonly require capacitors and compressors.

  • Note the system voltage, BTU capacity, and fluid or refrigerant type
  • Check whether the failure is electrical, mechanical, or related to flow and pressure
  • Confirm whether you need an exact replacement or an equivalent cross-reference
Planning Guide

Step 2: Match Specifications to the Application

Each subcategory has critical spec requirements. Capacitors must match microfarad and voltage ratings. Circulator pumps require correct flow rate and head pressure. Aquastats need the right temperature range for the system they control.

  • Use the existing part number or equipment nameplate data as your starting point
  • For pumps and compressors, verify flange size, port configuration, and mounting style
  • For controls like aquastats, confirm setpoint range and differential settings
Planning Guide

Step 3: Plan for Preventive Maintenance

Many service calls can be reduced by stocking high-failure-rate components and scheduling regular cleaning and inspection. HVAC cleaning equipment and condensate pump maintenance are often overlooked until a system failure occurs.

  • Stock capacitors and condensate pumps as common wear items for service vans
  • Schedule coil and drain line cleaning seasonally to prevent efficiency loss
  • Inspect bearings and pump accessories annually in hydronic systems
8 SubcategoriesOrganized by Component Type

From aquastats to compressors, each subcategory focuses on a specific part or function so you can navigate directly to what you need.

Electrical & MechanicalTwo Major Failure Categories

Most HVAC service calls involve either an electrical component failure (capacitor, control) or a mechanical one (bearing, pump, compressor), and this category covers both.

Residential to CommercialWide Application Range

Parts and controls in this category are used across light residential systems, large commercial HVAC installations, and industrial climate control applications.

Preventive + ReactiveSupports Both Service Strategies

Whether you're responding to a breakdown or running a scheduled maintenance program, this category includes parts and equipment for both approaches.

FAQ

Common questions before buying

How do I know if I need a capacitor or a compressor replacement?

Start with the capacitor—it's a common, low-cost failure point that can prevent a compressor from starting. Test the capacitor first. If it checks out and the compressor still won't run, further diagnosis of the compressor is warranted.

What specifications do I need to replace a circulator pump?

You'll need the flow rate (GPM), head pressure (feet of head), pipe connection size, and voltage. Check the nameplate on the existing pump or the system design documents to confirm these values before ordering.

Can I use HVAC cleaning equipment on both residential and commercial systems?

Yes, but verify that the equipment capacity and chemical compatibility match the system size and coil material. Some commercial systems require higher-pressure coil cleaning tools than those used in residential applications.

What is an aquastat and when does it need to be replaced?

An aquastat is a temperature control device used in hydronic heating systems to regulate boiler operation. It may need replacement if the system short-cycles, fails to reach setpoint, or if the control shows signs of electrical failure during testing.

!