This under-sink utility sink pump system helps commercial buyers add drainage for bar, laundry, and utility sinks where direct access to drain plumbing is not available. It mounts beneath the sink to support a compact installation.
The black thermoplastic utility sink pump uses an internal pressure sensor switch and float switch. It operates on 115 V, single-phase, 60 Hz power with a 1/3 HP motor, 15 A amperage rating, and 8 ft grounded power cord. The pump provides up to 31 gal/min or 1,860 gal/hr, with a 1-1/4 in NPT discharge connection, 62 psi maximum pressure, and 120 °F maximum liquid temperature. Included components are a 1-1/4 in check valve, 1-1/4 in ball valve, gasket, seal, O-ring, and sink drain screen.
Key Features:
- Under-sink mounting: Installs beneath the sink for a compact drainage solution.
- Utility sink application: Supports bar, laundry, and utility sink installations without direct drain-plumbing access.
- Pressure sensor switch: Provides automatic pump operation through an internal pressure sensor.
- 1-1/4 in NPT discharge: Provides a defined discharge connection for compatible plumbing installation.
- Minimum order: Effective minimum order is 1.
Choose this utility sink pump system for under-sink drainage needs in bar, laundry, or utility sink installations. Confirm connection and electrical requirements before installation.
Product Documents
| Color/Finish: |
Black |
| Country of Origin: |
MX |
| Product Depth: |
9.4 |
| Product Height: |
13.6 |
| Product Type: |
Bin |
| Product Width: |
9.4 |
| Color: |
Black |
| Length: |
10.4 in |
| Weight: |
15.3 lbs |
| Cord Length: |
8 ft |
| Discharge Connection Size: |
1-1/4 in |
| Amperage: |
15 A |
| Discharge Connection Type: |
NPT |
| Float Switch: |
Yes |
| Gallons per Hour: |
1860 gal/hr |
| Gallons per Minute: |
31 gal/min |
| Hertz: |
60 Hz |
| Horsepower: |
1/3 HP |
| Includes: |
1-1/4 In Check Valve 1-1/4 In Ball Valve 8' Grounded Power Cord Gasket Seal O-Ring And Sink Drain Screen |
| Material: |
Thermoplastic |
| Max Fluid Temperature: |
120 °F |
| Max Pressure: |
62 psi |
| Phase: |
1 |
| Shaft Seal Material: |
Silicone Carbide |
| Solids Handling: |
Yes |
| Switch Type: |
Internal Pressure Sensor |
| Temperature of Liquid Pumped: |
120 |
| Type: |
Utility Sink Pump |
| Voltage: |
115 V |
| Warranty: |
1 yr |
| Shipping Method: |
Parcel |
No additional information available.