Pullers & Separators

Pullers and separators help maintenance teams remove bearings, races, bushings, gears, discs, and other tight-fitting components during service work. Choose by whether the component needs external hooks, an under-part pulling point, or internal gripping, then confirm the required reach, spread or gripping range, access clearance, and compatibility with existing equipment.

Product Display:
Helpful Buying Guide

Choose Pullers & Separators for the Access and Grip Your Job Requires

Removal work often depends on where the tool can grip the component. Review whether access is available around the outside of the part, beneath it, or only from inside. Then match the tool’s stated dimensions and compatible components to the maintenance task.

Visual Guide

Popular examples in this category

Use Cases

Remove tight-fitting service components

These tools support removal of bearings, bearing races, bushings, gears, discs, and similar components during maintenance work. A separator can create a pulling point beneath a part when conventional hooks lack room.

How to Choose

Match the gripping method to access

Use external or reversible hooks where the component can be reached from outside. Consider a separator for under-part access, or an internal extractor for bearings, rings, and bushings that must be gripped from within.

Applications

Support bearing and gear maintenance

Pullers and separators are suited to maintenance work involving installed bearings and related tight parts. Narrow hooks can be useful where access is limited, while internal gripping supports extraction from the inside of a component.

Additional Information

Confirm fit and tool compatibility

Check the stated spread, reach, or internal gripping range against the component and available working space. For replacement parts, verify the required screw and existing puller equipment compatibility before ordering.

2-jawSeparator design

Creates a pulling point beneath tight-fitting parts.

70-100 mmInternal gripping example

Listed for an internal bearing extractor.

60°Tapered tip example

Specified for a detachable puller tip.

7-7/8 inReach example

Listed for a narrow quick-adjust puller.

Comparison Guide

Compare Puller and Separator Approaches

Use the component location and available access to narrow the appropriate tool type.

Tool approachBest suited forWhat to check
Bearing separatorBearings, roller bearings, inner races, and tight parts where conventional hooks cannot fitRequired spread, room beneath the component, and compatibility with the pulling device
Internal bearing extractorInner bearings, outer bearing rings, and bushingsInternal gripping range and the component’s inside diameter
Narrow two-jaw pullerBearings, gears, discs, and similar components in limited-access locationsRequired spread and reach, plus whether internal or external pulling is needed
Planning Guide

Plan the right fit before choosing

Plan the Removal Method

Start with where the tool can make contact

The component’s location and available access should guide the tool choice. Different puller designs provide contact from outside, beneath, or inside the part.

  • Select reversible hooks for internal or external pulling arrangements.
  • Use separator jaws when hooks cannot fit beneath a bearing, race, or other tight part.
  • Choose an internal extractor for inner bearings, outer rings, and bushings requiring internal contact.
Check Dimensions and Adjustment

Confirm the working range for the job

Compare the tool’s stated spread, reach, or gripping range with the part to be removed and the clearance around it. Adjustment features can also affect setup during service work.

  • A separator sample has a stated spread of 1-3/16 to 9-7/8 inches.
  • An internal extractor sample has a stated 70 to 100 mm gripping range.
  • A narrow two-jaw puller sample lists a 9-7/8 inch spread and 7-7/8 inch reach.
  • Quick jaw adjustment can help position jaws on a cross-beam without a wrench.
Maintain Compatible Equipment

Match replacement and connected components carefully

Some tools and components are intended for use with specified equipment. Confirm the exact connection or screw requirement when replacing a puller contact part or building a pulling setup.

  • A separator sample is compatible with Series 18 pulling devices.
  • A detachable puller tip sample is specified for use with a 4205S screw.
  • A replacement tip’s stated length and tapered point profile can help confirm fit.
FAQ

Common questions before buying

When should I use a bearing separator?

Use a bearing separator when there is not enough room for conventional pulling hooks. Its jaws fit beneath the component to create a pulling point.

What can an internal bearing extractor remove?

An internal bearing extractor is designed for removing inner bearings, outer bearing rings, and bushings by gripping inside the component.

Can a two-jaw puller be used for internal and external pulling?

A puller with reversible hooks can support both internal and external pulling arrangements.

How do I choose a replacement puller tip?

Confirm compatibility with the specified screw and existing puller equipment, then check the stated tip length and contact profile.