This gas-powered water transfer pump is designed for commercial users needing to move water for general transfer and flood recovery work. Its 3-inch inlet and discharge connections support high-volume water movement where electric power may not be available.
The pump uses a 210cc, 7 HP unleaded-gas engine with recoil starting and a 0.95-gallon fuel tank. It has an aluminum housing, cast-iron impeller, ceramic-carbon shaft seal, and tubular steel frame with a black powder-coated finish. The unit delivers up to 264 GPM (15,840 gallons per hour), has a maximum 26-foot suction head and 62-foot discharge head, and is intended for water with no solids. Overall dimensions are 21 in. L x 16 in. W x 17 in. H; weight is 63 lb.
Key Features:
- High-flow capacity: Moves up to 264 gallons per minute to support high-volume water transfer tasks.
- 3-inch MNPT connections: Provides matching 3-inch inlet and discharge connection sizes for water-transfer setups.
- Gas-powered operation: Allows operation away from electrical outlets using unleaded fuel.
- Durable pump components: Aluminum housing, cast-iron impeller, and ceramic-carbon shaft seal support dependable pumping performance.
- Effective minimum order: Minimum order is 1 unit; packaging quantity is not specified as the selling-unit quantity.
Choose this 3-inch pump for water transfer and flood recovery work requiring portable, gas-powered flow capacity. It includes a strainer and hose bands for setup.
Product Documents
| Country of Origin: |
CN |
| Material: |
Aluminium |
| Motor: |
7 HP |
| Product Depth: |
16.5 |
| Product Height: |
17 |
| Product Type: |
Bin |
| Product Width: |
16 |
| Length: |
21 in |
| Weight: |
63 lbs |
| Discharge Connection Size: |
3 in |
| Discharge Head: |
62 ft |
| Inlet Connection: |
3 in |
| Max Diameter Solids: |
No Solids |
| Suction Head Maximum: |
26 ft |
| Discharge Connection Type: |
MNPT |
| Engine: |
210CC Powerease Engine |
| Engine Displacement: |
210cc cm³ |
| Fuel Tank Capacity: |
0.95 gal |
| Fuel Type: |
Unleaded |
| Gallons per Hour: |
15840 gal/hr |
| Horsepower: |
7 HP |
| Housing Material: |
Aluminium |
| Impeller Material: |
Cast Iron |
| Includes: |
Strainer & Hose Bands |
| Inlet Connection Type: |
MNPT |
| Recommended Oil Type: |
SAE 10W30 |
| Shaft Seal Material: |
Ceramic Carbon |
| Starter System: |
Recoil |
| Type: |
Water Pump |
| Warranty: |
1 yr |
| Shipping Method: |
Parcel |
No additional information available.