115V Condensate Removal Pump, 65 GPH
This 115V condensate removal pump is for commercial HVAC buyers who need to move collected condensate away from air conditioners, high-efficiency gas furnaces, and condensing boilers.The pump...
Save 10% On Your First Order! Coupon Code: NEWCUSTOMER10
This 230V condensate removal pump is for HVAC professionals and facility teams who need to move condensate from air-conditioning or high-efficiency gas furnace systems when gravity drainage is unavailable. It helps direct collected condensate away from the system.
The pump has a 230V power requirement, an oil-resistant tank, a stainless steel motor shaft, and a built-in check valve. Its flexible installation design includes rubber feet for hard-surface setups and an external test/run lever for testing and draining the tank during service. It measures 7 in. wide, 12 in. deep, and 5.5 in. high. An external overflow safety switch with a 72 in. cable is available separately.
Key Features:
Choose this condensate pump for 230V air-conditioning or high-efficiency gas furnace applications where a gravity drain is not available. Its built-in check valve and service-focused features support installation and maintenance needs.
| Material: | ABS Plastic |
| Product Depth: | 7" |
| Product Height: | 5.5" |
| Product Type: | Condensate Pumps |
| Product Width: | 12" |
| Quantity Included: | 1 |
| Shipping Weight: | 5 lbs |
| Voltage: | 230 V |
| Warranty: | 2 yr |
| Manufacturer Part Number: | 554621 |
| Length: | 10-3/16 in |
| Width: | 4-13/16 in |
| Height: | 6-1/2 in |
| Cord Length: | 6 ft |
| Discharge Head: | 3/8" Barb ft |
| Shut Off: | 20 ft |
| Suction Draw Head: | 19 ft |
| Amperage: | 0.6 / 0.5 A |
| Brand: | Little Giant |
| For Use With: | Air Conditioner, Gas Furnace, Condensing Boilers |
| Gallons per Hour: | 69 @ 5'H gal/hr |
| Gallons per Minute: | 1.1 gal/min |
| Hertz: | 50/60 Hz |
| Horsepower: | 1/30 HP |
| Manufacturers Part Number: | 554621 |
| Max Liquid Temperature: | 140 °F |
| Max Temperature: | 120 °F |
| Operation: | Fully Automatic: Start, Stop, Safety Switch |
| Phase: | 1 |
| Plug Configuration: | 6-15P |
| Wattage: | 75 W |
| Certifications: | cCSAus |
| Width: | 7.00 in |
| Height: | 5.50 in |
| Depth: | 12.00 in |
No additional information available.
This 115V condensate removal pump is for commercial HVAC buyers who need to move collected condensate away from air conditioners, high-efficiency gas furnaces, and condensing boilers.The pump...
This condensate removal pump helps HVAC professionals and facility maintenance teams move collected condensate away from air conditioners, high-efficiency gas furnaces, and condensing boilers. Its...
This automatic condensate removal pump is designed for HVAC professionals and facility maintenance teams that need to collect and discharge condensate from air conditioning equipment, dehumidifiers,...
This 115V condensate pump is designed for air-conditioning and boiler condensate applications. It helps maintenance teams move collected condensate where a 24-foot lift is needed.The pump has a...
This low-profile condensate pump is designed for HVAC and boiler applications where condensate must be collected and moved from tight installation areas. It gives maintenance and installation...