This replacement motor is designed for facilities teams and maintenance professionals servicing compatible 30-inch wall fans manufactured before 2026. It restores fan operation for cooling and air circulation where the original motor requires replacement.
The steel PSC ball-bearing motor operates on 120 V, single-phase power and draws 2 A. It provides three speeds at 920, 1000, and 1100 RPM, with pull-chain control, a 12-foot SJT power cord, and an oscillating mechanism with a 90-degree sweep. The motor is UL and cUL listed.
Key Features:
- 1/3 HP output: Provides replacement power for a compatible 30-inch wall fan.
- Three-speed operation: Allows users to select from 920, 1000, or 1100 RPM fan speeds.
- PSC ball-bearing motor: Uses permanently lubricated ball bearings for long-term operation.
- Pull-chain control: Provides straightforward local speed operation.
- 90-degree oscillation: Helps direct airflow across a broader area when oscillation is used.
- Minimum order: Effective minimum order is 1 each.
Choose this motor when replacing the drive motor in a compatible pre-2026 30-inch wall fan and when 120 V, pull-chain, three-speed operation is required.
| Color: |
Gray |
| Amperage: |
2 A |
| Assembly Required: |
No |
| For Use With: |
607051 Pre-2026 |
| Horsepower: |
1/3 HP |
| Material: |
Steel |
| Motor Type: |
PSC Ball Bearing |
| Number of Speeds: |
3 |
| Oscillating/Non Oscillating: |
Oscillating |
| Phase: |
1 |
| RPM: |
920/1000/1100 rpm |
| Type: |
Pull Chain |
| Voltage: |
120 V |
| Warranty: |
1 yr |
| Certifications: |
UL, cUL Listed |
| Shipping Method: |
Parcel |
| Width: |
12.50
in
|
| Height: |
7.00
in
|
| Depth: |
10.00
in
|
No additional information available.