This 10-inch left-tilt table saw is designed for commercial shops and professional users who need a stationary saw for repeated cutting tasks. Its tubular stand, extension wings, and rail-and-fence system support an organized cutting setup.
The saw has a cast iron table top, one left-hand stamped steel extension wing, and two right-hand stamped steel extension wings. A one-piece rail system and heavy-duty fence with dual rip windows support cutting alignment. The stand uses two fixed wheels and one swivel wheel for mobility. Overall dimensions are 44 inches wide, 33 inches deep, and 44 inches high.
Key Features:
- 10-inch left-tilt design: Provides the stated table-saw configuration for shop cutting work.
- Cast iron table top: Creates a solid work surface for material support.
- Steel extension wings: Extends the table setup with one left-hand and two right-hand wings.
- One-piece rail system: Supports consistent fence positioning for precision cuts.
- Blade brake: Stops the blade within seconds after power is switched off.
- Tool-free riving knife and pawls: Allows adjustment and assembly without tools.
Choose this corded table saw for a shop setup that requires a 10-inch left-tilt saw, steel extension wings, mobile stand, and accessible operating controls. Effective minimum order: 1 each.
| Country of Origin: |
TW |
| Material: |
Steel |
| Product Depth: |
33 |
| Product Height: |
44 |
| Product Type: |
Corded Table Saws |
| Product Width: |
33 |
| Weight: |
245 lbs |
| Arbor Diameter: |
5/8 in |
| Blade Diameter: |
10 in |
| Dust Port Diameter: |
2-1/2 (4 Adapter) in |
| Max Cut Depth @ 45°: |
2-1/4 in |
| Max Cutting Depth: |
3-1/2 in |
| Max Diameter of Dado: |
8 in |
| Max Rip Right of Blade: |
52 in |
| Rip Capacity: |
52 in |
| Table Height: |
44 in |
| Table Size (L x W): |
20 x 27 in |
| Table Size W/ Extension (L x W): |
40 X 27 in |
| Table Size W/ Full Extension (L x W): |
76-1/2 X 27 in |
| Amperage: |
15 A |
| Arbor Speed: |
3450 rpm |
| Depth of Cut at 45°: |
2-1/2 in |
| Depth of Cut at 90°: |
3-1/2 in |
| Fence Style: |
Biesemeyer |
| Hertz: |
60 Hz |
| Max Rip Left of Blade: |
15 in |
| Max Width of Dado: |
13/16 in |
| Motor Amps: |
15 A |
| Motor Horsepower: |
1-3/4 HP |
| Motor Voltage: |
120/240 V |
| Phase: |
1 |
| Prewired Voltage: |
120 V |
| Style: |
Contractor |
| Table Material: |
Cast Iron |
| Type: |
Table Saw with Extension Wings |
| Voltage: |
120/240 V |
| Shipping Method: |
LTL |
| Width: |
44.00
in
|
| Height: |
44.00
in
|
| Depth: |
33.00
in
|
No additional information available.