This bearing separator helps maintenance professionals remove ball bearings, roller bearings, inner races, and other tight-fitting parts when there is not enough room for conventional pulling hooks. Its separator jaws fit beneath the component to create a secure pulling point.
The two-jaw separator has a 1-3/16 to 9-7/8 in (30 to 250 mm) diameter and spread range, with a 15-3/4 in depth. Wedge-shaped jaws and sharp blades are designed to reach flush-mounted parts, while broad support surfaces help protect the component being removed. It is intended for use with Series 18 pulling devices.
Key Features:
- Two-jaw separator design: Creates a pulling point beneath bearings, races, and other tight parts where puller hooks cannot fit.
- 1-3/16 to 9-7/8 in spread range: Accommodates a range of component diameters from 30 to 250 mm.
- Wedge-shaped jaws: Helps position the separator securely beneath the part being removed.
- Broad support surfaces: Helps reduce the risk of damage to the pulled component during removal.
- Series 18 compatibility: Works with compatible Series 18 pulling devices for a firmly connected pulling setup.
- Effective minimum order: Minimum order is 1 unit; packaging quantity is not specified as the selling-unit quantity.
Choose this bearing separator for controlled removal work on bearings, races, and closely fitted components where access for standard pulling jaws is limited.
| Country of Origin: |
DE |
| Product Depth: |
15.75 |
| Product Height: |
2.28 |
| Product Type: |
Pullers & Separators |
| Product Width: |
18.7 |
| Weight: |
50 lbs |
| Diameter: |
1-3/16 to 9-7/8 in |
| Spread: |
1-3/16" - 9-7/8" (30 - 250mm) in |
| Capacity: |
22 |
| Description: |
Series 15 Separators |
| For Use With: |
18-5 Pulling Device |
| Number of Jaws: |
2 |
| Type: |
Bearing Separator |
| Shipping Method: |
Parcel |
| Width: |
13.39
in
|
| Height: |
2.28
in
|
| Depth: |
18.70
in
|
No additional information available.