Galvanized Malleable

Galvanized malleable fittings and galvanized steel pipe nipples help build, extend, redirect, reduce, close, and join compatible threaded pipe connections. Common commercial uses include plumbing, facility maintenance, water-system installations and repairs, piping assemblies, and applicable railing work.

Product Display:
Helpful Buying Guide

How to Choose Galvanized Malleable Fittings

Start with the job the fitting needs to perform, then confirm the connection size, configuration, thread compatibility, length where applicable, and stated pressure designation. The products represented here include fittings for right-angle turns, compact threaded joins, pipe extension, size transitions, connection closure, and joining compatible pipe connections.

Visual Guide

Popular examples in this category

1-1/2 in. Galvanized Malleable Cored Plug, 150 PSI, Lead Free1-1/2 in. Galvanized Malleable Cored Plug, 150 PSI, Lead FreeWBB17546131/2 in Galvanized Malleable 90° Elbow, FNPT, 150 PSI, Lead-Free1/2 in Galvanized Malleable 90° Elbow, FNPT, 150 PSI, Lead-FreeWBB17546142 in. Galvanized Malleable Iron 90° Pipe Elbow, 150 PSI, Lead-Free2 in. Galvanized Malleable Iron 90° Pipe Elbow, 150 PSI, Lead-FreeWBB17546231/2 in. Close Galvanized Steel Pipe Nipple, 150 PSI, Lead-Free1/2 in. Close Galvanized Steel Pipe Nipple, 150 PSI, Lead-FreeWBB1754424
Use Cases

Match the fitting to the task

Use 90° elbows and street elbows to change a pipe run at a right angle. Choose couplings to join compatible pipe connections, bushings to transition between stated sizes, plugs to close an applicable connection, and nipples to join or extend threaded components.

How to Choose

Confirm size, shape, and threads

Compare the nominal size or stated size transition first. Then select the required configuration, such as elbow, coupling, hex bushing, cored plug, or nipple. For threaded connections, verify the listed FNPT or MNPT connection type against compatible mating components.

Applications

Plan for plumbing and piping work

These products are represented for plumbing, facility maintenance, piping assemblies, water-system installations and repairs, and applicable railing or pipe-routing work. Select only components that fit the planned compatible pipe layout.

Additional Info

Review stated product designations

The represented products carry a 150 PSI rating or designation and are described as lead-free where stated. Galvanized malleable iron or steel construction varies by fitting type, while close nipples provide a compact connection option.

150 PSIStated rating

Represented products list a 150 PSI rating or designation.

90°Direction change

Elbows and street elbows redirect compatible pipe runs at a right angle.

1/2 in. to 2 in.Listed sizes

Representative fittings span listed sizes from 1/2 in. through 2 in.

1 eachMinimum order

Several represented products list an effective minimum order of one each.

Comparison Guide

Compare the main fitting types

Use this quick comparison to narrow the product type based on the planned pipe connection.

Fitting typePrimary roleRepresented selection details
90° elbow or street elbowChanges direction of a pipe run at a right angleRepresented in 1/2 in. and 2 in. sizes; listed at 150 PSI.
Pipe nippleJoins or extends compatible threaded componentsClose options and stated lengths are represented; MNPT is listed on several nipples.
Coupling, bushing, or plugJoins, adapts, or closes a connectionA 1 in. coupling, 1 in. x 3/4 in. hex bushing, and 1-1/2 in. cored plug are represented.
Planning Guide

Plan the right fit before choosing

1. Identify the connection need

Choose the fitting configuration before comparing sizes

A fitting’s shape determines how it works within a threaded pipe assembly. Select a component that directly addresses the planned connection or route.

  • 90° elbows redirect a pipe run around a corner.
  • Street elbows provide a compact option for a right-angle change in direction.
  • Couplings join compatible pipe connections.
  • Hex bushings adapt between two stated connection sizes.
  • Cored plugs close an applicable connection.
2. Select the nipple length and size

Use close or measured-length nipples for the planned layout

Galvanized steel pipe nipples are represented in close configurations and in stated lengths. A close nipple is intended for compact threaded connections, while listed length options provide a defined connection point between threaded components.

  • Close nipples are represented in 1/2 in., 3/4 in., and 1 in. sizes.
  • Measured nipple examples include 1/2 in. x 3 in., 3/4 in. x 6 in., and 2 in. x 4 in.
  • Match the listed size and length to the compatible piping layout.
  • Review MNPT listings where threaded compatibility is required.
3. Verify the stated requirements

Check pressure designation and product details

After selecting the fitting type and size, review the product’s listed pressure rating or designation and construction details. The products represented in this category are listed at 150 PSI, with lead-free designations on the summarized products.

  • Review the 150 PSI rating or designation for the specific product.
  • Confirm galvanized malleable or galvanized steel construction as listed.
  • Use the lead-free designation where applicable to the work.
  • Several represented items have a minimum order of 1 each.
FAQ

Common questions before buying

What galvanized malleable fitting types are represented?

The summaries represent 90° elbows, a 90-degree street elbow, a coupling, a hex bushing, and a cored plug, along with galvanized steel pipe nipples.

When should I choose a close pipe nipple?

Choose a close nipple when a compact threaded connection is needed. Close configurations are represented in 1/2 in., 3/4 in., and 1 in. sizes.

What thread types are listed?

A 1/2 in. 90° elbow is listed with FNPT connections. Several pipe nipples are listed with MNPT or male NPT connections.

What pressure rating is shown for these products?

The representative products are listed with a 150 PSI working pressure rating, specification, rating, or designation.

!