-
Edwards Signaling
Green 240V LED Specialty Bulb
Our Price:$119.94This green 240V LED specialty bulb is for commercial maintenance teams and facilities that need a green lighting component for specialty lighting equipment. It provides a straightforward replacement...
+ Add to Cart The item has been added -
GoGreen Power
Green 3-Outlet Cube Adapter
Our Price:$4.25This 3-outlet cube adapter helps facility teams, office staff, and other commercial users add plug-in access at a grounded wall receptacle. Its plug-and-play design provides additional outlets while...
+ Add to Cart The item has been added -
GoGreen Power
Green 3-Outlet Tri-Tap Adapter with Covers
Our Price:$7.49This 3-outlet tri-tap adapter is for users who need to add plug-in access at a grounded wall receptacle. Its plug-and-play design provides additional outlets for electrical connections while helping...
+ Add to Cart The item has been added -
GoGreen Power
Green 9 ft. 3-Outlet Foot Switch Extension Cord
Our Price:$11.49This 3-outlet extension cord gives users a simple foot-operated way to turn connected items on and off. It is a practical choice for buyers who need accessible power control for seasonal lighting and...
+ Add to Cart The item has been added -
GoGreen Power
Green Indoor/Outdoor Adjustable Floodlight Holder Kit
Our Price:$11.24This indoor/outdoor floodlight holder kit is for users who need to position a floodlight where illumination is needed while helping shield the bulb from moisture, dust, and dirt. Its adjustable neck...
+ Add to Cart The item has been added -
Checkers Industrial Products
Grip Guard 5-Channel Cable Protector, Yellow and Gray
Our Price:$192.26This five-channel cable protector is for crews and facilities that need to organize and cover cables or hoses in active work areas. It helps route lines through a protected pathway while providing a...
+ Add to Cart The item has been added -
L.H.Dottie
Ground Clamp with 3/4-Inch Hub, 1/2 to 1-Inch Range, 25-Pack
Our Price:$499.94This ground clamp is for electrical installers connecting rigid or IMC conduit to steel or copper water pipe. It provides a termination point for a ground wire as part of the connection.Each clamp...
+ Add to Cart The item has been added -
Wiremold
Grounding Receptacle and Box, 15A, 125V, White
Our Price:$30.94This grounding receptacle and box is for electrical installers who need a receptacle connection point in a raceway system. It provides a practical location for wiring connections while maintaining a...
+ Add to Cart The item has been added -
Wiremold
Half-Gang Poke-Thru Blank Housing
Our Price:$16.24This half-gang poke-thru blank housing is a floor-box component for electrical installation teams that need to manage cables at a poke-thru opening. Its egress doors help keep the opening reduced...
+ Add to Cart The item has been added -
GoGreen Power
Heavy-Duty 100 ft. 3-Outlet Extension Cord with Lighted End
Our Price:$109.94This heavy-duty extension cord is for users who need to extend power around a garage or to electrical devices while supplying multiple connection points. Its three-outlet end turns one outlet into...
+ Add to Cart The item has been added -
GoGreen Power
Heavy-Duty 12/3 SJTW Extension Cord, 100 ft., Black
Our Price:$129.94This heavy-duty extension cord gives contractors, maintenance teams, and other commercial users a single grounded outlet at an extended 100-foot reach. It is designed to bring power to heavy-duty...
+ Add to Cart The item has been added -
GoGreen Power
Heavy-Duty 25 ft. 12/3 SJTW Extension Cord, Single Outlet, Black
Our Price:$41.94This heavy-duty extension cord gives users a 25-foot reach for powering one tool or piece of equipment from a standard outlet. Its single-outlet design is suited to indoor and outdoor work in areas...
+ Add to Cart The item has been added -
Checkers Industrial Products
Heavy-Duty 5-Channel Cable Guard
Our Price:$432.28This heavy-duty cable guard is designed for crews and facilities that need to route and protect air lines, electrical cables, and hoses across ground-level pathways. Its five channels organize lines...
+ Add to Cart The item has been added -
Tire Conversion Technologies
Heavy-Duty 5-Channel Cable Protector
Our Price:$435.94This heavy-duty cable protector helps construction and industrial crews route cables and wires across active traffic areas. Its five channels organize multiple runs while helping protect them where...
+ Add to Cart The item has been added -
GoGreen Power
Heavy-Duty 50 ft. 12/3 SJTW Extension Cord with Single Outlet
Our Price:$72.94This heavy-duty extension cord gives contractors, maintenance teams, and facility users added reach for powering compatible equipment and tools. Its single-outlet design supports indoor and outdoor...
+ Add to Cart The item has been added -
Checkers Industrial Products
Heavy-Duty Single-Channel Rubber Cable Protector, 5 ft. - 5-3/4 in W x 1-3/8 in H x 61 D
Our Price:$125.94This heavy-duty rubber cable protector helps facilities teams, contractors, and workplace managers organize and cover portable cords, cables, and hose lines in walkways and work areas. Its single...
+ Add to Cart The item has been added -
Checkers Industrial Products
Heavy-Duty Single-Channel Rubber Cable Protector, 5 ft. - 6 in W x 1-7/8 in H x 60 D
Our Price:$159.94This heavy-duty rubber cable protector helps facility teams and maintenance crews organize and cover portable cords, cables, and hose lines in walkways or work areas. Its single channel keeps lines...
+ Add to Cart The item has been added -
PSG
Heavy-Duty SPDT Relay with 24 VAC Coil, 8A, 240V
Our Price:$13.74This heavy-duty SPDT relay is for electrical professionals who need to switch a circuit with a 24 VAC coil. It provides single-pole, double-throw operation for applications requiring an 8 amp, 240V...
+ Add to Cart The item has been added -
PSG
Heavy-Duty SPNO-SPNC Relay with 24 VAC Coil
Our Price:$13.49This heavy-duty SPNO-SPNC relay is for electrical professionals who need a relay for circuit control. Its 24 VAC coil and SPNO-SPNC configuration support integration into compatible electrical...
+ Add to Cart The item has been added -
Lithonia Lighting
High Bay 360° Fixture-Mount PIR Occupancy Sensor
Our Price:$73.94This high-bay occupancy sensor is for facility teams managing individual on/off control of T5 and T8 fluorescent lighting. It detects occupancy through passive infrared sensing to help automate...
+ Add to Cart The item has been added
Electrical, Lighting & Power Supplies for Every Application
Whether you're wiring a new facility, upgrading lighting, managing power distribution, or simply replacing batteries, this category covers the full range of electrical and power products for commercial, industrial, and facility maintenance needs. Use the subcategory paths below to find exactly what your project requires.
Choose your starting point
Popular examples in this category
3V CR2016 Lithium Coin Batteries, 5-PackWBB3170572
Batteries & Charging
3V BatteriesWhat Electrical, Lighting & Power Products Are Used For
These products support building infrastructure, equipment operation, and facility maintenance. Common uses include installing or replacing wiring and conduit, setting up lighting systems, managing power backup, controlling circuits, and keeping devices charged and operational across commercial and industrial environments.
How to Choose the Right Electrical or Power Product
Start by identifying your application: new installation, replacement, or upgrade. Then consider voltage and amperage requirements, environment (indoor vs. outdoor, wet vs. dry), code compliance needs, and whether you need portable power, permanent wiring, or lighting control. Match product specs to your load and location.
Common Applications Across Electrical & Power Categories
Typical applications include office and warehouse lighting upgrades, panel and breaker installations, backup power for critical equipment, low-voltage wiring for data and controls, switch and receptacle replacement, and battery maintenance for vehicles, tools, and emergency devices.
What to Know Before You Buy
Always verify local electrical codes before purchasing wiring, boxes, or panels. Check compatibility between components such as switches, receptacles, and load ratings. For lighting, confirm fixture type, bulb base, and lumens output. For backup power, match runtime requirements to battery capacity and inverter wattage.
Which Subcategory Fits Your Project?
Use this table to match your immediate need to the right starting point.
| Need | Best Fit Subcategory | Why It Matters |
|---|---|---|
| Replace or stock batteries for tools, devices, or vehicles | Batteries & Charging | Correct battery chemistry and voltage ensures compatibility and safe operation |
| Install or upgrade facility or workspace lighting | Commercial & Industrial Lighting | Fixture type, lumen output, and mounting style must match the space and application |
| Run new wiring or replace existing cable and conduit | Electrical Boxes, Wiring & Cable | Wire gauge, insulation rating, and conduit type must meet load and code requirements |
| Source connectors, tape, terminals, or general electrical hardware | Electrical Supplies | Having the right small components on hand prevents project delays and callbacks |
| Protect equipment from outages or manage power across a facility | Power Distribution & Backup Power | Proper sizing of UPS, PDUs, and panels prevents overloads and downtime |
| Replace or add outlets, switches, or circuit controls | Switches, Receptacles & Controls | Load rating, GFCI/AFCI compliance, and compatibility with existing wiring are critical |
Plan the right fit before choosing
Step 1: Define Your Scope and Environment
Before selecting products, clarify whether the work involves new construction, renovation, or maintenance. Identify the environment: commercial office, industrial facility, outdoor, or hazardous location. This determines the enclosure ratings, wire gauges, and fixture types you'll need.
- New construction typically requires conduit, wire, boxes, panels, and fixtures specified to local code
- Renovation or replacement work may require matching existing voltage, amperage, and box configurations
- Outdoor and wet locations require weatherproof or watertight-rated components
- Hazardous or industrial environments may require explosion-proof or heavy-duty rated equipment
Step 2: Calculate Load and Power Requirements
Matching your electrical components to actual load requirements prevents overloads, equipment damage, and code violations. Add up the wattage or amperage of all devices on a circuit before selecting wire gauge, breakers, or power distribution equipment.
- Wire gauge must match the amperage rating of the circuit and breaker
- Power strips and distribution units should be rated above your expected peak load
- Battery backup systems should be sized for runtime, not just wattage
- Lighting loads should account for fixture wattage plus any dimmer or control compatibility
Step 3: Select Compatible Controls and Accessories
Switches, receptacles, and controls must be compatible with the wiring, load type, and any smart or automated systems in use. Confirm that boxes, covers, and mounting hardware match your wall or panel configuration before ordering.
- GFCI and AFCI receptacles are required in specific locations by most electrical codes
- Dimmer switches must be rated for the bulb type (LED, CFL, incandescent) being controlled
- Electrical boxes must be sized for the number of wires and devices they will contain
- Labeling and organizing wiring during installation reduces troubleshooting time later
This category is divided into seven focused subcategories so you can navigate directly to batteries, lighting, wiring, boxes, supplies, power distribution, or controls.
Products span both indoor commercial use and outdoor or industrial environments, with options rated for wet, damp, and hazardous locations.
The category covers everything from low-voltage battery and control wiring to high-amperage commercial power distribution and panel components.
Options include primary power infrastructure, portable power, and battery backup systems to keep critical equipment running during outages.
Common questions before buying
How do I know which wire gauge to use for my project?
Wire gauge is determined by the amperage the circuit will carry. Common residential and light commercial circuits use 14 AWG for 15-amp circuits and 12 AWG for 20-amp circuits. Always match wire gauge to the breaker rating and consult local electrical codes for your specific application.
What is the difference between a UPS and a power strip with surge protection?
A surge protector diverts voltage spikes but provides no power during an outage. A UPS (uninterruptible power supply) includes a battery that keeps connected equipment running temporarily when power is lost, giving you time to save work or safely shut down systems.
Do I need GFCI outlets in all locations?
Most electrical codes require GFCI protection in areas near water, including bathrooms, kitchens, garages, outdoor locations, and unfinished basements. Requirements vary by jurisdiction, so always verify with local code before installation.
What should I consider when choosing commercial lighting fixtures?
Key factors include the required lumen output for the space, fixture mounting type (surface, pendant, recessed), bulb or lamp compatibility, color temperature for the work environment, and whether dimming or occupancy controls are needed. Energy efficiency ratings also affect long-term operating costs.