-
Vestil
Yellow Aluminum Hose and Cable Crossover Ramp, 60 in.
Our Price:$346.94This aluminum crossover ramp helps facilities teams protect air lines, electrical cords, and computer cables where forklifts, carts, and foot traffic cross them. It provides a defined path over...
+ Add to Cart The item has been added -
Vestil
Yellow Aluminum Hose and Cable Crossover Ramp, 71-7/8 in. Long
Our Price:$415.94This aluminum crossover ramp helps facilities protect air lines, electrical cords, and computer cables where forklifts, carts, and foot traffic pass over them. It provides a defined path across...
+ Add to Cart The item has been added -
Vestil
Yellow Aluminum Hose and Cable Crossover, 24 in.
Our Price:$40.94This yellow hose and cable crossover is for workers protecting air lines, electrical cords, and computer cables where forklifts, carts, and foot traffic can cause damage. It provides a ramped...
+ Add to Cart The item has been added -
Vestil
Yellow Aluminum Hose and Cable Crossover, 36 in.
Our Price:$63.94This aluminum hose and cable crossover helps workplaces protect air lines, electrical cords, and computer cables where forklifts, carts, and foot traffic cross them. It provides a defined ramped path...
+ Add to Cart The item has been added -
Vestil
Yellow Molded Rubber Hose and Cable Ramp Protector
Our Price:$46.94This molded rubber ramp protector helps office staff and facility teams route hoses and cables across pedestrian areas while helping guard them against roll-over damage.The yellow ramp measures 39...
+ Add to Cart The item has been added -
Checkers Industrial Products
Yellow Multi-Tunnel Hose Bridge Ramp Components for Lines up to 3 in.
Our Price:$255.94These yellow ramp components are for facility and site teams building a multi-tunnel hose bridge system. They help create ramped access at the bridge ends while accommodating lines up to 3 inches...
+ Add to Cart The item has been added -
Yellow PVC Elbow with Plain Spigot Ends
Our Price:$7.69This yellow PVC elbow is for commercial electrical buyers who need a plain-end fitting to change direction along an installation run. Its plain spigot ends provide a straightforward connection format...
+ Add to Cart The item has been added -
Gardner Bender
Yellow Ring Terminals for 12-10 AWG Wire, 5/16-3/8 in. Stud, 15-Pack
Our Price:$4.04These yellow ring terminals provide crimp-type wire connections for electrical professionals and maintenance teams working with 12-10 AWG wire. Their ring design is intended to connect wire to...
+ Add to Cart The item has been added -
Checkers Industrial Products
Yellow Tunnel Connector for Multi-Tunnel Hose Bridge Systems
Our Price:$215.94This tunnel connector is a component for facilities and work areas building a multi-tunnel hose bridge system. It connects compatible bridge sections to help create protected routing for lines up to...
+ Add to Cart The item has been added -
Gardner Bender
Yellow Twist-On Wire Connectors, 500-Pack
Our Price:$24.49These yellow twist-on wire connectors are for electricians and electrical maintenance teams making copper-to-copper wire connections. The 500-pack supports stocking for installation, repair, and...
+ Add to Cart The item has been added -
Gardner Bender
Yellow Wing-Type Wire Connectors, 500-Pack
Our Price:$30.94These yellow wing-type wire connectors are for electricians and electrical maintenance professionals making copper-to-copper wire splices. The 500-pack provides connectors for joining conductors...
+ Add to Cart The item has been added -
L.H.Dottie
Zinc Alloy Reducing Bushing, 1 in. x 1/2 in., 50-Pack
Our Price:$169.94These reducing bushings are for electrical installers working with rigid or IMC conduit. They reduce a threaded opening so it can accept a smaller conduit size, helping adapt conduit connections...
+ Add to Cart The item has been added -
L.H.Dottie
Zinc Alloy Reducing Bushing, 1 in. x 3/4 in., 50-Pack
Our Price:$169.94These reducing bushings are for electrical professionals working with rigid or IMC conduit. They reduce a threaded opening from 1 inch to 3/4 inch, allowing the opening to accept a smaller conduit...
+ Add to Cart The item has been added -
L.H.Dottie
Zinc Alloy Reducing Bushing, 1-1/2 in. to 1 in., 25-Pack
Our Price:$239.94This reducing bushing is for users working with rigid or IMC conduit who need to adapt a threaded opening for a smaller conduit size. It reduces a 1-1/2 in. opening to accept 1 in. conduit.Made of...
+ Add to Cart The item has been added -
L.H.Dottie
Zinc Alloy Reducing Bushing, 1-1/2 in. x 1-1/4 in., 25-Pack
Our Price:$239.94This reducing bushing is for electrical contractors and installers who need to adapt a larger threaded conduit opening for smaller rigid or IMC conduit. It reduces a 1-1/2 in. opening to accept 1-1/4...
+ Add to Cart The item has been added -
L.H.Dottie
Zinc Alloy Reducing Bushing, 1-1/2 in. x 1/2 in., 25-Pack
Our Price:$239.94This 25-pack of reducing bushings is for installers working with rigid or IMC conduit. Each bushing reduces a threaded opening so it can accept a smaller conduit size.These reducing bushings are made...
+ Add to Cart The item has been added -
L.H.Dottie
Zinc Alloy Reducing Bushing, 1-1/2 in. x 3/4 in., 25-Pack
Our Price:$239.94This reducing bushing is for electrical installers working with rigid or IMC conduit. It reduces a threaded opening so it can accept a smaller conduit size, helping adapt conduit connections during...
+ Add to Cart The item has been added -
L.H.Dottie
Zinc Alloy Reducing Bushing, 1-1/4 in. to 1 in., 25-Pack
Our Price:$141.52This reducing bushing helps electricians and electrical contractors adapt a threaded conduit opening for a smaller conduit size. It is designed for rigid or IMC conduit installations where a 1-1/4 in...
+ Add to Cart The item has been added -
L.H.Dottie
Zinc Alloy Reducing Bushing, 1-1/4 in. x 1/2 in., 25-Pack
Our Price:$141.52This reducing bushing is for electrical professionals and contractors working with rigid or IMC conduit. It reduces a threaded opening from 1-1/4 in. to accept 1/2 in. conduit, helping adapt conduit...
+ Add to Cart The item has been added -
L.H.Dottie
Zinc Alloy Reducing Bushing, 1-1/4 in. x 3/4 in., 25-Pack
Our Price:$141.52This reducing bushing is for electrical installers working with rigid or IMC conduit. It reduces a threaded opening so it can accept a smaller conduit size.Made of zinc alloy, this reducing bushing...
+ Add to Cart The item has been added
Electrical, Lighting & Power Supplies for Every Application
Whether you're wiring a new facility, upgrading lighting, managing power distribution, or simply replacing batteries, this category covers the full range of electrical and power products for commercial, industrial, and facility maintenance needs. Use the subcategory paths below to find exactly what your project requires.
Choose your starting point
Popular examples in this category
3V CR2016 Lithium Coin Batteries, 5-PackWBB3170572
Batteries & Charging
3V BatteriesWhat Electrical, Lighting & Power Products Are Used For
These products support building infrastructure, equipment operation, and facility maintenance. Common uses include installing or replacing wiring and conduit, setting up lighting systems, managing power backup, controlling circuits, and keeping devices charged and operational across commercial and industrial environments.
How to Choose the Right Electrical or Power Product
Start by identifying your application: new installation, replacement, or upgrade. Then consider voltage and amperage requirements, environment (indoor vs. outdoor, wet vs. dry), code compliance needs, and whether you need portable power, permanent wiring, or lighting control. Match product specs to your load and location.
Common Applications Across Electrical & Power Categories
Typical applications include office and warehouse lighting upgrades, panel and breaker installations, backup power for critical equipment, low-voltage wiring for data and controls, switch and receptacle replacement, and battery maintenance for vehicles, tools, and emergency devices.
What to Know Before You Buy
Always verify local electrical codes before purchasing wiring, boxes, or panels. Check compatibility between components such as switches, receptacles, and load ratings. For lighting, confirm fixture type, bulb base, and lumens output. For backup power, match runtime requirements to battery capacity and inverter wattage.
Which Subcategory Fits Your Project?
Use this table to match your immediate need to the right starting point.
| Need | Best Fit Subcategory | Why It Matters |
|---|---|---|
| Replace or stock batteries for tools, devices, or vehicles | Batteries & Charging | Correct battery chemistry and voltage ensures compatibility and safe operation |
| Install or upgrade facility or workspace lighting | Commercial & Industrial Lighting | Fixture type, lumen output, and mounting style must match the space and application |
| Run new wiring or replace existing cable and conduit | Electrical Boxes, Wiring & Cable | Wire gauge, insulation rating, and conduit type must meet load and code requirements |
| Source connectors, tape, terminals, or general electrical hardware | Electrical Supplies | Having the right small components on hand prevents project delays and callbacks |
| Protect equipment from outages or manage power across a facility | Power Distribution & Backup Power | Proper sizing of UPS, PDUs, and panels prevents overloads and downtime |
| Replace or add outlets, switches, or circuit controls | Switches, Receptacles & Controls | Load rating, GFCI/AFCI compliance, and compatibility with existing wiring are critical |
Plan the right fit before choosing
Step 1: Define Your Scope and Environment
Before selecting products, clarify whether the work involves new construction, renovation, or maintenance. Identify the environment: commercial office, industrial facility, outdoor, or hazardous location. This determines the enclosure ratings, wire gauges, and fixture types you'll need.
- New construction typically requires conduit, wire, boxes, panels, and fixtures specified to local code
- Renovation or replacement work may require matching existing voltage, amperage, and box configurations
- Outdoor and wet locations require weatherproof or watertight-rated components
- Hazardous or industrial environments may require explosion-proof or heavy-duty rated equipment
Step 2: Calculate Load and Power Requirements
Matching your electrical components to actual load requirements prevents overloads, equipment damage, and code violations. Add up the wattage or amperage of all devices on a circuit before selecting wire gauge, breakers, or power distribution equipment.
- Wire gauge must match the amperage rating of the circuit and breaker
- Power strips and distribution units should be rated above your expected peak load
- Battery backup systems should be sized for runtime, not just wattage
- Lighting loads should account for fixture wattage plus any dimmer or control compatibility
Step 3: Select Compatible Controls and Accessories
Switches, receptacles, and controls must be compatible with the wiring, load type, and any smart or automated systems in use. Confirm that boxes, covers, and mounting hardware match your wall or panel configuration before ordering.
- GFCI and AFCI receptacles are required in specific locations by most electrical codes
- Dimmer switches must be rated for the bulb type (LED, CFL, incandescent) being controlled
- Electrical boxes must be sized for the number of wires and devices they will contain
- Labeling and organizing wiring during installation reduces troubleshooting time later
This category is divided into seven focused subcategories so you can navigate directly to batteries, lighting, wiring, boxes, supplies, power distribution, or controls.
Products span both indoor commercial use and outdoor or industrial environments, with options rated for wet, damp, and hazardous locations.
The category covers everything from low-voltage battery and control wiring to high-amperage commercial power distribution and panel components.
Options include primary power infrastructure, portable power, and battery backup systems to keep critical equipment running during outages.
Common questions before buying
How do I know which wire gauge to use for my project?
Wire gauge is determined by the amperage the circuit will carry. Common residential and light commercial circuits use 14 AWG for 15-amp circuits and 12 AWG for 20-amp circuits. Always match wire gauge to the breaker rating and consult local electrical codes for your specific application.
What is the difference between a UPS and a power strip with surge protection?
A surge protector diverts voltage spikes but provides no power during an outage. A UPS (uninterruptible power supply) includes a battery that keeps connected equipment running temporarily when power is lost, giving you time to save work or safely shut down systems.
Do I need GFCI outlets in all locations?
Most electrical codes require GFCI protection in areas near water, including bathrooms, kitchens, garages, outdoor locations, and unfinished basements. Requirements vary by jurisdiction, so always verify with local code before installation.
What should I consider when choosing commercial lighting fixtures?
Key factors include the required lumen output for the space, fixture mounting type (surface, pendant, recessed), bulb or lamp compatibility, color temperature for the work environment, and whether dimming or occupancy controls are needed. Energy efficiency ratings also affect long-term operating costs.